00197190-03_VD_SIPLACE_Pro_10_1_SP1_DE_EN.pdf - 第21页

SIPLAC E Pro V10. 1 SP1 / Softwar e Version Desc ripti on Ausgabe 02/2013 Edit ion 21 5.7.2 Revised Displa y of the He ight Entries Meanings In the m ain vie w of the C om ponent Shape Edit or, the m eanings of t he hei …

SIPLACE Pro V10.1 SP1 / Software Version Description Ausgabe 02/2013 Edition

5.7 Simplified Component Shape Editor

The Component Shape Editor has been improved to simplify the component shape handling. For

this, the views of the Component Shape Editor have been reengineered. The main changes are

described in this section.

5.7.1 Automatic Settings when Selecting Pick-up Process

As soon as the user changes the pick-up mode to With Contact or Without Contact in SIPLACE

Pro Desk, a correct travel profile and vacuum are automatically set.

Figure 4-3: Setting pick-up mode

If the pick-up mode is changed to With Contact, SIPLACE Pro Desk automatically sets Normal

Vacuum as vacuum value and 1 – Pickup Down Standard as travel profile.

If the pick-up mode is changed to Without Contact, SIPLACE Pro Desk automatically sets Early

Vacuum as vacuum value and 17 – Down Contactless as travel profile.

The valid combinations of the pick-up modes and the corresponding settings are listed in the

following table.

Pick-up Mode Travel Profile Z-Axis Down Vacuum Mode

With Contact 17

Early vacuum

Without Contact 1 Early Vacuum

Normal Vacuum

Table 4-2: Pick-up modes and settings

SIPLACE Pro V10.1 SP1 / Software Version Description Ausgabe 02/2013 Edition

5.7.2 Revised Display of the Height Entries Meanings

In the main view of the Component Shape Editor, the meanings of the height entries are precisely

displayed in order to make the difference between the height entries more comprehensible.

Figure 4-4: Height entries in the Component Shape Editor

5.7.3 Specified Pick-up Process for nnn5 and nnn6 Nozzles

Only contactless pick-up is performed with the nnn5 and nnn6 nozzle types.

5.7.4 Warning at Too Low Number of Re-picks

If the value for the number of re-picks is too low (value=1), this may cause frequent machine

breakdowns. In this case, a corresponding warning will be displayed in SIPLACE Pro Desk.

Figure 4-5: Number of re-picks too low

SIPLACE Pro V10.1 SP1 / Software Version Description Ausgabe 02/2013 Edition

5.7.5 Setting Acceleration Reduction

The following preset acceleration values can be selected in the Accelerations tab of the

Component Editor:

● Max (maximum acceleration)

● 75% (lightly reduced acceleration)

● 50% (medium reduced acceleration)

● 25% (highly reduced acceleration)

● 10% (extremely reduced acceleration)

The percentage values refer to the maximum acceleration of the possible placement heads. The

absolute values are displayed in brackets.

Figure 4-6: Selecting acceleration value

The Expert Mode allows entering values outside the recommended limits.

The values can be changed in the Data Maintenance Tool with the Suggest accelerations for

assigned Nozzles function.

Prerequisite

– The Allow entering values outside the recommended limits setting has to be enabled under

Settings – Options.