ISM-2000_OPE.pdf - 第52页
Software 3.1 rev_0 1 Edition 06/20 16 - Reproduction forbidden a Page 52 Storage Solut ions Soft ware Operating Manual An operator can also disable a speci fic cell: the machine will not use the cell because it wi ll be …
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 51
Storage Solutions Software Operating Manual
If in a cell there is an empty case, an operator can fill the cell with the
case selecting FILL SELECTED CELLS WITH CASES: to do this, the
operator has to select the cell to fill in and choose the height of the
case (e.g. up to 16 mm).
If the procedure has been correctly made, these following messages will appear and the case
will appear on the map.
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 52
Storage Solutions Software Operating Manual
An operator can also disable a specific cell: the machine will not use the cell because it will be
unusable space (pink colour).
To disable a cell, the operator has to select the cell and click the right button of the mouse and
then “DISABLE SELECTED CELLS”. This following warning will appear to the operator:
It is always possible to enable the cell just disabled: after confirming the warning, the space
will turn from pink to white colour and the cell will be used again.
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 53
Storage Solutions Software Operating Manual
ULTRAFLEX INTERFACE
If you access to the console using the username CONTAINER, you can open a new interface for
Ultraflex machine.
On the right side, the interface shows information about the extractions and at the bottom, there
is the initialization button.
The operator can see where the machine extracts reels (Fast exit or Main accumulator), the
progress of the extraction and details about the extraction.
When an operator makes a priority extraction, this following icon will appear: