ISM-2000_OPE.pdf - 第55页
Software 3.1 rev_0 1 Edition 06/20 16 - Reproduction forbidden a Page 55 Storage Solut ions Soft ware Operating Manual ENGAGED CASES are cases completely busy (there are two reels or 1 tray). EMPTY CASES are cases withou…
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 54
Storage Solutions Software Operating Manual
In case of priority extraction, the software temporarily stops the extraction queue to extract the
reel required with the extraction priority. When the machine extracted the reel into the fast exit
then the system can continue with the extraction queue started before.
In the middle on black section, there are logs about operations just done.
These buttons are needed to check the last
operations just made into the accumulator or in
to the rapid exit.
The operator will see these following windows:
At the top-left side, it is possible to see how many cases or reels are archived inside the
machine.
HALF CASES: Half cases are cases which contain only 1 reel. For this reason, they can be
extracted to insert another reel in the other position.
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 55
Storage Solutions Software Operating Manual
ENGAGED CASES are cases completely busy (there are two reels or 1 tray). EMPTY CASES
are cases without any material inside.
STANDBY CASES are cases inserted in a cell as stand-by material because:
- the camera could recognise the presence of reels but it could not read the code or
- the status of the reel was INACTIVE because the quantity of the components was 0
To extract the stand-by material, press EXTRACT STANDBY. To extract empty cases, press
EXTRACT EMPTY.
To start with the insertions, press INSERT button.
On the top, the operator can use these following buttons to start/pause/stop extraction queues:
To search a specific session, the operator can use the FIND field or checking the checkbox
“FIND ALL COMPLETED AND ABORTED”, it is possible to see all sessions made on the
machine.
To get all information about the operations made on the machine, the operator can click: This
following window will appear and it will show all activities made on the machine (insertions,
extractions etc)
When an operator extract a reel contained in a case with two reels, he can notice this following
icon near the extraction name (or session name).
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 56
Storage Solutions Software Operating Manual
This icon reminds the operator to use the PICKING DOUBLE VERIFY to check which reel is the
required reel. When a case is extracted, the operator can click on GO TO PICKING DOUBLE
VERIFY to check the reel using a PDA or a manual barcode reader connected to the machine.
After clicking on it, the operator can see a list of reels to find.