00197549-01_IM_TX150SS8_Win2008R2_en.pdf - 第39页
Installing Prim ergy TX 150 S8 with W indows S erver 20 08 R2 04/2014 Edit ion 39 Figure 4- 15 : New S imple Vol ume Wizard – Completed ► Click the F inish button t o com plete the task . Form atting m ay take a c ouple …
Installing Primergy TX150 S8 with Windows Server 2008 R2 04/2014 Edition
38
Figure 4-13: New Simple Volume Wizard – Assign Drive Letter or Path
► Ensure that drive D is selected in the dropdown menu and click the Next > button.
Figure 4-14: New Simple Volume Wizard – Format Partition
► Select the radio button besides Format this volume with the following settings.
► Select NTFS besides File system.
► Leave the default allocation unit size and enter a name for the new volume, e.g. "Data".
► Select the Perform a quick format checkbox and click the Next > button.
Installing Primergy TX150 S8 with Windows Server 2008 R2 04/2014 Edition
39
Figure 4-15: New Simple Volume Wizard – Completed
► Click the Finish button to complete the task. Formatting may take a couple of seconds.
Installing Primergy TX150 S8 with Windows Server 2008 R2 04/2014 Edition
40
4.4 Removing Default Gateway
As mentioned before, you have to remove the dummy default gateway that was entered during the
Installation Manager guided setup.
NOTICE
Exemplarily screenshots
The screenshots in this chapter are only for explanation and do not have to meet exactly
with your hardware.
Figure 4-16: Opening Network Settings
► Click on Start.
► Right-click on Network and select Properties.
The Network and Sharing Center opens.