00197442-03_VD_707_1_SP2_DE_EN.pdf - 第17页
Station S oftware 70 7.1 SP2 / Ver sion Desc ription Ausgabe 11/2014 E dition 17 7 Hardw are S pecif ication s 7.1 Supporte d F eeder T yp e s The f ollowing feeder s are suppor ted b y the 70 7. 1 SP2 s tation softw are…
Station Software 707.1 SP2 / Version Description Ausgabe 11/2014 Edition
16
6.7 SIPLACE Vision Enhancements
The SIPLACE Vision system has been enhanced as follows.
6.7.1 Reading PCB Barcodes with the PCB Camera
Compatible mode: Complete
Until now, a USB dongle containing the necessary software licenses was required for reading PCB
barcodes with the PCB camera.
As of this station software version, another method may be used alternatively with which no USB
dongle is required. The feature is realized via an internal algorithm and only the software licenses
are required.
Detailed information can be found in the respective Installation Manuals to PCB Barcode, item no.
[00197222-xx] and item no. [00197413-xx]
6.7.2 Displaying Polygon Shapes
Compatible mode: Complete
Polygons are now also displayed on the SIPLACE Vision GUI.
6.7.3 Accuracy of Polygon Circles
Compatible mode: Complete
The accuracy of polygon circle features has been improved.
6.7.4 Displaying Component Shape when Teaching Local Fiducials
Compatible mode: Complete
Soldering pad patterns are used as local fiducials for components that require an exact placement
position. In this case it might be difficult to determine the center of the local fiducial. When defining
the reference point, cross hairs and quads are displayed to help aligning the reference point
manually.
Optionally, the component shape of the component that shall be placed at this position may be
displayed. The reference point of the component shape (= placement position) determines the
reference point of the taught fiducial. I.e., it is assumed that the position of the taught local fiducial
is equal to the placement position of the component in the board description.
6.7.5 Multiple Measurements with CPP Placement Head
Multiple measurements can be performed with the CPP placement head via the stationary camera
in Pick&Place mode. Thus, the component range has been extended.
Station Software 707.1 SP2 / Version Description Ausgabe 11/2014 Edition
17
7 Hardware Specifications
7.1 Supported Feeder Types
The following feeders are supported by the 707.1 SP2 station software version:
– 4 mm – 104 mm X-feeder
– 2x8 mm X-feeder
– 16 mm XN-feeder
– 12 V2 X-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– Glue Feeder
– TrayStack Feeder AX (X4i S on location 2 and 3 only)
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– Arbitrary Carrier X (X-series only)
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– FFI feeders:
HanSan LED feeder
Top Engineering LED feeder
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE multi stick 60 AX
IPTE multi stick XL80 AX
– Stick feeder with X-adapter
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Dip module for X-tables (LDU_X)
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5/WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Splice sensor X-feeder
Station Software 707.1 SP2 / Version Description Ausgabe 11/2014 Edition
18
7.2 Digital Camera Systems
Digital CCD cameras are used as the camera systems.
7.2.1 Component Cameras
All heads are equipped with the standard camera listed below. High-resolution cameras are
additionally available for Twin Head and CPP.
Component camera
Camera
type
CPP
head
C&P20A
head
C&P20 M
head
3)
C&P20 P
head
4)
C&P
6 x 6 mm digital
23
-
(default) -
(default)
C&P
6 x 6 mm digital
41
-
(optional)
(default)
(optional)
C&P
18.7 x 18.7 mm digital
28
(optional) - - -
C&P
27 x 27 mm digital
29
(optional) - - -
C&P
27 x 27 mm digital
30
(default) - - -
C&P
16 x 16 mm digital
38
(optional) - - -
Stat. P&P
16 x 16 mm digital
1
)
25
- - - -
Stat. P&P
55 x 45 mm digital
1)
33
(optional)
2)
- - -
Stat. P&P
32 x 32 mm digital
36
(optional) -
Table 7-1: Component cameras, part 1
1)
Not supported on the SIPLACE X4i placement machine.
2)
Only together with CPP head, with which components up to a height of 11.5 mm can be placed.
3)
Only supported on the CA-series and X4 S micron /X4i S micron placement machines.
4)
Only supported on the X-series S placement machines.