00197442-03_VD_707_1_SP2_DE_EN.pdf - 第39页

Station S oftware 70 7.1 SP2 / Ver sion Desc ription Ausgabe 11/2014 E dition 39 D1 - 97968401 The sof tware hung up if you tried t o reject the c ompon ent after a dp axis timeout in order to m ake a ref erence run. D1 …

Station Software 707.1 SP2 / Version Description Ausgabe 11/2014 Edition

D1-94232111 After a power failure no placement heads were recognized.

D1-94349018 SirioConsole.exe stopped after a feeder change.

D1-94806401 With a new job a modified head configuration was reported (if the nozzle

reference run and the width adjustment were carried out together).

D1-95201357 Twin VHF: the z axis already moved up although the main axes were still

moving (only in case of pickup offset).

D1-95580941 The Restore MA Data function did not work.

D1-95290001 After the vacuum too low message the software stopped with an unhandled

exception.

D1-95979301 CA placement machine: Chuck was not measured correctly.

D1-96020401 An unhandled exception occurred (error 30016 with error 32602) and the

machine had to be rebooted.

D1-96027749 Wrong placement positions were used in the dry run.

D1-96214973 The software stopped during nozzle reference run.

D1-96226401 Sometimes the iSkip files were missing  additional traces implemented.

D1-96228901 A SIPLACE SX2 placement machine lost the calibration chip position during

head calibration.

D1-96228991 During calibration on a SIPLACE SX2 placement machine, the selected

segments were displayed in gray.

D1-96235830 The software stopped when trying to return the nozzle.

D1-96569001 eSW: Placement area 1 was waiting for PA2; placement began after PA1 had

been completed.

D1-96604912 The virtual keyboard had no digits.

D1-96763201 30399 Unexpected reboot from subsystem detected.

D1-96798401 It was not possible to specify two boards for a recipe with virtual PCB stacking.

D1-96874101 The software hung up after image recording of a tray.

D1-96899001 The board was not moved into the next machine after fiducial teaching.

D1-97063707 Inspite of ink spot to omit panels, all panels were completely placed.

D1-97108801 eSW: The statistical data of the head did not have any content.

D1-97140001

D17077-4770

There was an offset of ink spots in X4i S and inaccurate placement after the

machine cover was opened.

D1-97158707 Vision dumps could not be opened on a CA-series placement machine.

D1-97649301 Two buttons were available for the same function on the GUI.

D1-97851847 The button for the extended conveyor interface was missing on the GUI.

D1-97954814 An SX-series placement machine delivered erroneous Trace data.

Station Software 707.1 SP2 / Version Description Ausgabe 11/2014 Edition

D1-97968401 The software hung up if you tried to reject the component after a dp axis

timeout in order to make a reference run.

D1-97987901 There was an unhandled exception error and the station software

console hung up.

D1-98164001 Consecutive fault after a HW problem: the software hung up when a feeder

was removed.

D1-98199201 The GUI was frozen and the machine had to be restarted.

D1-98229601 After restart, a software error was always displayed on an SX4 placement

machine.

D1-98660211 On a CA-series placement machine with SIPLACE Wafer System and LDU,

the waiting position of the C&P20 placement head was directly above the

LDU.

D1-98957051 The ink spots of the robustness measurement were not correctly displayed.

D1-98990480

D1-98990432

D1-98990525

D16840-20813

Sporadically, the software hung up and displayed an unhandled

exception.

D1-99001901 If the placement of a component wass skipped it could not be reactivated.

D1-99338501 There was an unhandled exception when the SIPLACE Wafer System

was restarted.

D1-99346831

D1-98747909

D1-99789341

eSW: after every placement cycle there wass a height reference run for the

nozzle 2033 (the component sensor had problems to recognize the

components).

D1-99373901

D17305-4007

The WPC controller board did not work when the WPC BIOS got updated or a

new controller from the stock was installed.

D1-99780701 The C&P20 was placing slowly because the star was moving in energy save

mode when picking up or placing.

D1-99876401 A carrier with 12 magazines was mounted on an X3S placement machine with

Twin Head on gantry 3. Although each magazine could be reached by the TH

the 12th magazine could not be configured within the station.

D1-99907132 Unexpected reboot of the software.

D1-99924198 After a problem with an open safety circuit the software did not start again.

D1-100196301 30016 Unhandled exception error: the software hung up as soon as

there was an error with a component in connection with the glue feeder.

D1-100514701 The station software hung up after a complete tray was scanned into the

Teach menu and the machine had to be restarted.

D16717-13207 The station software could not be initialized.

D16747-10970 The C&P20A head only picked up components from the 1st pocket of the

manual tray.

D16807-4211 eSW: during production one segment was down and an error 40023 was

displayed that the machine cannot continue.

D16811-6525 The calculation of the reject rate was modified for station software version 706

and had to be adapted.

Station Software 707.1 SP2 / Version Description Ausgabe 11/2014 Edition

D16840-18801 Some components were missing after recovery placement when ink sports

were used.

D17134-3194 Auto recovery: the board was not unloaded from PA2.

D17241-5509 SIPLACE X4: the software stopped with the Windows unexpected stop

message.

D17280-1909

D1-92896801

D17280-3509

D17285-366

D17390-430

The software stopped on a SIPLACE X4 S placement machine as the pickup

position was corrected.

D17357-217

D16600-3607

D17263-3728

D17373-789

CPP head sporadically placed components with wrong angle (90 or 180

degrees twisted).

D17364-268 eSW: new link reference run for star and z axes (C&P20 A and C&P20 M) on

a machine with HCU.

Table 10-3: Corrected errors 707.1 station software version