ITT-Cannon-RF50-Catalog.pdf - 第27页
This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) a nd 12.4 GHz (SSMC). They provide a choice of Snap-on (SS…

PPRRIINNTTEEDD CCIIRRCCUUIITT BBOOAARRDD JJAACCKKSS
SMC PCB preferred styles feature stepped legs. This allows the jacks to be raised from the surface of the PCB, thereby
preventing the accumulation of soldering fluids and foreign bodies. A single piece conductor overcomes the problem of
internal joint separation during continuous wave/flow soldering operations.
Straight PCB Jack, 1,00 (.039) square legs
Part Number
B50 - 051 - 0000220
3,99
(.157)
7,49
(.295)
Ø1,00
(.039)
1,00
(.039)
4 POSNS
6,41
(.252)
Straight PCB Jack, 0,81 (.032) square legs
Part Number
B50 - 051 - 9019220
3,99
(.157)
7,49
(.295)
Ø1,00
(.039)
0,81
(.032)
4 POSNS
0
,61
(.024)
6,41
(.252)
Right Angle PCB Jack, 1,00 (.039) square legs
Part Number
B50 - 053 - 0000220
13,80
(.543)
10,62
(.418)
8,69
(.342)
5,56
(.219)
3,94
(.155)
Ø1,00
(.039)
6,41
(.252)
0.61
(.024)
1,00
(.039)
4 POSNS
Right Angle PCB Jack, 0,81 (.032) sq Legs
Part Number
B50 - 053 - 9019220
13,80
(.543)
10,62
(.418)
8,69
(.342)
5,56
(.219)
3,94
(.155)
Ø 1,00
(.039)
6,41
(.252)
0,61
(.024)
0,81
(.032)
4 POSNS
Mounting Plan A (Page 40)
Mounting Plan B (Page 40)
Mounting Plan A (P
age 40)
Mounting Plan B (Page 40)
Cannon 50 Ohm Connectors SMC
www
.ittcannon.com
26

This range of 50 ohm microminiature radio frequency
connectors is suitable for both military and commercial
equipment operating at frequencies up to 4 GHz (SSMB)
a
nd 12.4 GHz (SSMC). They provide a choice of Snap-on
(SSMB) or Screw-on (SSMC) and are available for a wide
range of flexible cables.
SSMC connectors are used where a positive mechanical
engagement is required and where space permits the
use of torque wrenches. SSMB connectors are quick
disconnect versions of the SSMC and are used in
applications where limited space prohibits the use of
torque wrenches or when components or modules must
be quickly changed to keep down time to a minimum.
NOTES
1) Inside diameter of female contact to meet VSWR, mating characteristics and
connector durability
, when mated with a 0,36 - 0,38 (.014 - .015) diameter male
contact.
2) Must meet the force to engage and
disengage when mated with its
mating part.
0,84
(.033)
MIN
0,00
(.000)
MIN
RP
PLUG JACK
1,78
(.070)
MAX
0,84
(.033)
MIN
SEE NOTE
# 2
Ø1,35
(.053)
MAX
Ø4,83
(.190)
MAX
Ø1,37
(.054)
MIN
Ø2,67
(.105)
MAX
Ø0.36/0.38
(.014/.015)
0,00
(.000)
MIN
0,84
(.033)
MAX
RP
1,91
(.075)
MIN
1,91
(.075)
MIN
CLOSED ENTRY CONTACT
3,10
(.122)
3,10
(.122)
MIN
0,00
(.000)
MIN
6,40 UNF-2B
THREAD
3,96
(.156)
A/F HEX
2,29
(.090) MAX
2,29
(.090)
MIN
2,29
(.090)
MIN
6,40 UNF-2A
THREAD
2,29
(.090) MAX
5,08
(.200) MAX
Ø1,35
(.053)
MIN
Ø2,57
(.101)
MIN
Ø1,37
(.054)
MIN
Ø2,54
(.100)
MAX
Ø 0,36/0,38
(.014/.015)
4,32
(.170)
MIN
3,00
(.118)
0,84
(.033)
MAX
0,00
(.000)
MIN
0,00
(.000)
MIN
JACKPLUG
RP
RP
CLOSED ENTRY
CONTACT
SSMB (SNAP-ON)
SSMC (SCREW-ON)
MMAATTIINNGG IINNTTEERRFFAACCEE
Cannon 50 Ohm Connectors SSMB / SSMC
27
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Key Features
• Small size
• Low mass
• Close packing density
• Used in airborne applications

ELECTRICAL
I
mpedance
Frequency Range
Voltage Rating
Insulation Resistance
Contact resistance
Contact Current Rating
50Ω
SSMB = 0 to 4.0 GHz. SSMC = 0 to 12.4 GHz
At Sea Level = 250 Vrms. at 21km (70k feet) = 60 Vrms
1000 MΩ minimum
Center Contact = 4.0 m Ω maximum initial. 6.0 m Ω maximum after environment
O
uter Contact = 1.0 m Ω maximum initial. 1.5 m Ω maximum after environment
Braid to Body = 1.0 m Ω maximum
1.0 A dc maximum
0.30 dB maximum @ 1.5 GHz
SSMB = -40 dB minimum @ 2 - 3 GHz
SSMC = -50 dB minimum @ 2 - 3 GHz
Connector Configuration
SSMB SSMC
Cable group Straight Right Angle Straight Right Angle
RG178/U, 196/U 1.25 + .02F 1.25 + .03F 1.20 + .02F 1.20 + .03F
RG188/U, 316/U 1.30 + .02F 1.30 + .03F 1.25 + .03F 1.30 + .02F
SSMB: Initial = 26.7 N (6 lbs.) max. engagement and 8.9 N(2 lbs.) minimum disengagement.
After 500 matings = 26.7 N (6 lbs.) max. engagement and 4.4 N (1 lb.) min. disengagement.
SSMC: 0.11 Nm (16 in. oz.) torque max.
SSMB: N/A SSMC: 0.2 Nm to 0.23 Nm (28 - 32 in.oz)
0.28 Nm to 0.35 Nm (40 - 50 in. oz)
SSMB: N/A SSMC: 111 N (25 lbs. ) minimum
Body , Body Components: Brass, half hard. Male and Female Contacts: Beryllium Copper.
Insulators: PTFE. Lockwashers: Phosphor Bronze. Crimp Ferrule: Annealed copper alloy.
Center Contacts: Gold plated. Other Metal Parts: Gold or nickel plated to meet the
finish and corrosion requirements of MIL-C -39012
-65° C to 165° C
MIL-STD -202, Method 101, test condition B, 5% salt solution
MIL-STD-202, Method 204, SSMB: test condition B (15 G's). SSMC: test condition D (20 G's)
MIL-STD -202, Method 213, SSMB: test condition B, 75 G's @ 6 milliseconds, 1/2 sine.
SSMC: test condition C, 100 G's @ 6 milliseconds, 1/2 sine.
MIL
-STD
-202, Method 107, test condition B, except high temperature shall be 85º C.
High temperature shall be 200ºC for connectors using 200ºC cables.
500 matings minimum
8,9 N (2 lbs.) minimum axial force.
When properly assembled to the compatible single braided coaxial cable, the retention
is equal to the breaking strength of the cable.
Body plating options
The following part number suffices can be specified for SSMB and SSMC connectors.
...220 gold body
...910 nickel body
Insertion Loss
RF Leakage
Voltage Standing Wave Ratio (VSWR)
To 12.4 GHz or 80% of upper cut-off
frequency of the cable, whichever is lower.
Applicable to 50
Ω cables only.(F = GHz)
Engagement Forces
Mating Torque
Locknut Torque
Coupling Nut Retention
Materials
Finish/Plating
Temperature Rating
Corrosion (salt spray)
Vibration, High F
requency
Shock
Thermal Shock
Connector Durability
Contact Captivation
Cable Retention
MECHANICAL
ENVIRONMENTAL
GENERAL
SSPPEECCIIFFIICCAATTIIOONNSS
Cannon 50 Ohm Connectors SSMB / SSMC
www
.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
28