CP-842E-842ME Operator's Guide-Preliminary-CP842-10E.pdf - 第59页
Chapter 5 Stopping the Machine 5.1 Stopping the Machine T emporarily 5.2 Resetting the Machine from the Cycle Stop Status 5.3 Stopping the Machine in an Emergency 5.4 Resetting the Machine from the Emergency Stop Status …
Automatic Operation
Procedure
1. Select [Production] at the [Main] screen.
2. Select [Automatic] from the [Production Mode] section.
3. Press the START button.
Notes: 1. If the nozzle check display appears on the operation panel, replace the
nozzle following the procedure given in section 3-5 Nozzle
Replacement. Once this is done make the necessary preparations in
accordance with the procedure outlined in Nozzle set check given in
this section and then enter Step operation.
2. If the device check display appears on the operation panel, follow the
procedure in Parts Set Check in section 4-1 to make the necessary
preparations and then enter Step operation.
Chapter 4: Starting Production
Preliminary
4-6 CP-842E/842ME Operator’s Guide
Chapter 5
Stopping the Machine
5.1 Stopping the Machine Temporarily
5.2 Resetting the Machine from the Cycle Stop Status
5.3 Stopping the Machine in an Emergency
5.4 Resetting the Machine from the Emergency Stop Status
Preliminary
5-1CP-842E/842ME Operator’s Guide
Carry out cycle stop to temporarily stop the machine during the course of auto-
matic production for checking program and so on.
Procedure
1. Press the CYCLE STOP button.
The machine will come to a halt once the cycle in progress has finished.
The START button is enabled when the machine enters the cycle stop status.
Procedure
1. Press the START button.
Production will resume from the next cycle after the cycle in which production
on the machine was halted.
When an emergency situation occurs during operation perform an emergency
stop to halt the machine immediately.
Procedure
1. Press the EMERGENCY STOP button.
The EMERGENCY STOP buttons on both sides of the machine are enabled at
all times. Press this button as soon as an emergency situation occurs. This will
cut the operation power and stop the machine at once.
5.3
Stopping the Machine in an Emergency
5.2
Resetting the Machine from the Cycle
Stop Status
5.1 Stopping the Machine Temporarily
Chapter 5: Stopping the Machine
Preliminary
5-2 CP-842E/842ME Operator’s Guide