CP-842E-842ME Operator's Guide-Preliminary-CP842-10E.pdf - 第81页
All panels remaining in the machine (in-conveyor , in-carrier , XY -table) can be unloaded. Remove the panels in order as they are unloaded to the out-con- veyor . Procedure 1. Select [Panel Loader] from the [Setup] sect…
A new panel can be loaded onto the XY-table by means of a command opera-
tion. This can also be used when a panel is already on the XY-table and the
new panel is to be loaded after the existing panel is unloaded. The panels can
be changed using the following operation.
Procedure
1. Select [Panel Loader] from the [Setup] section at the [Main]
screen.
2. Select [Load Panel].
3.
Press the START button.
All panels from the XY-table to the out-conveyor can be unloaded. Remove
the panels in order as they are unloaded to the out-conveyor.
Procedure
1. Select [Panel Loader] from the [Setup] section at the [Main]
screen.
2. Select [Unload] from the [Load/Unload] section.
3. Press the START button.
8.4 Unloading Panels From the XY-table
8.3 Loading a New Panel
Chapter 8: Production Support Functions
Preliminary
8-4 CP-842E/842ME Operator’s Guide
All panels remaining in the machine (in-conveyor, in-carrier, XY-table) can be
unloaded. Remove the panels in order as they are unloaded to the out-con-
veyor.
Procedure
1. Select [Panel Loader] from the [Setup] section at the [Main]
screen.
2. Select [Flush Out] from the [Load/Unload] section.
3. Press the START button.
The position from which the XY-table receives a panel from the in-conveyor
is referred to as the "loading position" and the position from which a panel is
unloaded from the XY-table to the out-conveyor is called the "unloading posi-
tion".
Procedure
1.
Select [Panel Loader] from the [Setup] section at the [Main]
screen.
2. Select [Move to Loading Position] or [Move to Unloading
Position] from the [Main Conveyor] section.
3. Press the START button.
8.6 Moving to the Panel Loading/
Unloading Position on the XY-Table
8.5 Unloading All Panels
Chapter 8: Production Support Functions
Preliminary
8-5CP-842E/842ME Operator’s Guide
The panel lifter for the XY-table is operated via the Z-axis servo motor. This
lifter moves up and down to receive a panel from the in-carrier and unload a
panel to the out-conveyor.
Procedure
1. Select [Panel Loader] from the [Setup] section at the [Main]
screen.
2. Select [Lifter Up] or [Lifter Down] from the [Main Conveyor] sec-
tion.
3. Press the START button.
Main conveyor clampers can be operated individually.
The panel lifter can only move up and down when the XY-table is at the load-
ing or unloading position. Consequently, the XY-table must be moved to the
loading or unloading position before this command can be used (see section 8-
6).
Procedure
1. Select [Panel Loader] from the [Setup] section at the [Main]
screen.
2. Select [Clamp] or [Unclamp] from the [Main Conveyor] section.
3. Press the START button.
8.8 Main Conveyor
Clamping/Unclamping
8.7 Panel Lifter Up/Down
Chapter 8: Production Support Functions
Preliminary
8-6 CP-842E/842ME Operator’s Guide