00196645-02_JG_ CP20P CP20A CPP TWIN HEAD Nozzles_en.pdf - 第15页
1 - 11 www.asm-smt.com Nozzle Descriptions Example: L = 15.000 mm r tip = 0.750 mm Tip: 1.500 x 1.100 mm (LxW) L shows the nozzle length from the base to the tip. r tip shows the radius of the nozzle tip for cylindrical …
1 - 10
www.asm-smt.com
Correct Assignment of Nozzle – Component for SIPLACE C&P and SIPLACE CPP
To prevent any detection problems with small structures, the component must be in the focus range (area of focus) of the
camera.
The focus range of the SIPLACE C&P20 camera is between 9.4 and 11.4 mm (i.e. 10.4 +/– 1 mm).
The focus range of the SIPLACE CPP is between 13.3 and 17.3 mm (i.e. 15.3 +/– 2 mm).
NOTICE
When selecting the correct nozzle for a component, check whether the total value of nozzle length plus compon-
ent height is within this range.
Example:
Nozzle length L = 9.400 mm
Component height H = 1.200
mm
Total = 10.600 mm
1 - 11
www.asm-smt.com
Nozzle Descriptions
Example:
L = 15.000 mm
r
tip
= 0.750 mm
Tip: 1.500 x 1.100 mm (LxW)
L shows the nozzle
length from the base
to the tip.
r
tip
shows the radius
of the nozzle tip for
cylindrical
components.
Example:
r
tip
= Ø 1.5 mm / 2
= 0.750 mm
Tip shows the length
and width or the
diameter of the
nozzle tip.
1 - 12
www.asm-smt.com
Nozzle Overview
Standard Nozzles in the 5xx Series (TPU)
516
L = 20.000 mm
Tip: 6.000 x 3.000 mm (LxW)
Item no. 03012036
517
L = 20.000 mm
Tip: Ø 8.000 mm
Item no. 03012042
518
L = 18.700 mm
Tip: Ø 12.500 mm
Item no. 03012011
519
L = 18.700 mm
Tip: Ø 24.000 mm
Item no. 03012034
Nozzle removal tool
Type 5xx assembly
Item no. 03014091
508
L = 9.750 mm
Tip: Ø 12.500 mm
Item no. 03089064
Observe the section Nozzle
Adapter [page 1 – 28].
See also
2 Nozzle Adapters [}28]