00196645-02_JG_ CP20P CP20A CPP TWIN HEAD Nozzles_en.pdf - 第6页

1 - 2 www.asm-smt.com Job Guide Structure This Job Guide is divided into separate chapters that deal with various different component groups. The first column on each page, "Components", shows the component sha…

1 - 1

www.asm-smt.com

Introduction: General Information about Components, Nozzles and

Adapters

1 - 2

www.asm-smt.com

Job Guide Structure

This Job Guide is divided into separate chapters that deal with various different component groups. The first column on

each page, "Components", shows the component shape details for the individual components and the name of the

corresponding GF file.

Simply search for the component to be placed (or the component shape), to find out which is the appropriate nozzle.

NOTICE

The component shape file names correspond to the original file names from the GF Editor of the programming

system.

1 - 3

www.asm-smt.com

The four main columns Placement head C&P20A/M, CPP (internal and external camera), C&P20P/M2 and TwinHead

show the nozzles to be used with the component shape(s) for each of the placement heads.

C&P20A/M

Collect & Place

20 segment

CPP

Collect & Place

(Internal or external camera)

C&P20P/M2

Collect & Place

20 segment

Twin Head

NOTICE

When using the SIPLACE CPP, components can either be centered with the internal head camera or with an

external stationary camera (P&P mode). Centering with the internal head camera uses the camera type SST30

for components up to 27mmx27mm. The external stationary camera type SST33 is used for components up

to a size of 50mmx40mm.

Example of internal camera: Example of external camera: