IFS-NX_SPE_EN.pdf - 第46页

IFS - NX P rodu ct S pecificat ions 42 9-2-5 Intelli stocker (1) For a mechan ical tape feeder This is a stora ge stand to store a feeder equipped with t he reading function of an RFID and can be moved w i th casters. (A…

IFS-NX Product Specifications

9-2-1 Intelli trolley (RFID)

This is a feeder exchange trolley corresponding to an RFID.

The information on an RFID that has been recognized automatically is transmitted to an IFS server via

an Intelli trolley pool.

9-2-2 Intelli trolley (CAN)

This is a feeder exchange trolley corresponding to CAN.

When the system is used in CAN, you have to add a feeder bank ID board to an electric feederbank

(EF). Since a feeder bank ID board is mounted on an electric feeder bank (RF) as astandard device,

you do not have to add any board to the electric feeder bank (RF).

The information on the feeder and feeder bank that has been recognized through the CAN is

transmitted to an IFS server through a PW02.

9-2-3 Intelli trolley pool (RFID)

This Intelli trolley pool for the RFID is composed of an MPU for the RFID and cables.

Up to four sets of Intelli trolleys (RFIDs) can be connected to the system by using one Intelli trolley pool.

Model

MPC+

MPC-4C

Power supply

Voltage

Single-phase 100 to 240 V

10%

Single-phase 100 to 240 V

10%

Frequency

50/60 Hz

Apparent power

45 VA

Dimension

Width (W)

106 mm

Length (L)

126 mm

Height (H)

33.6 mm

56 mm

Mass

Approx. 310g

310 g

RFID

characteristics

Operating

frequency

125 KHz 125 kHz

Safety specification

European Low Voltage

Directive 2006/95/EC

EMC Directive 2004/108/EC

R&TTE Directive 1999/5/EC

CE marking applied

*1 A power cable of the Japanese specification is supplied with the Intelli trolley

pool. (The power cable of the overseas specification needs to be arranged at the

site.)

9-2-4 PW02

This PW02 is composed of an MPC-CAN, power supply unit, and cables.

The MPC-CAN is built into the PW02.

Up to two sets of Intelli trolleys (CANs) can be connected to the system by using one PW02.

One PW02 allows up to two Intelli trolleys (CAN) and up to two Intelli trolleys (RFID) to be connected to

the system.

Power supply *1

Voltage

Single-phase 100 to 240 V AC

10%

Frequency

50/60 Hz

Apparent power

600 VA

Dimension

Width (W)

290 mm

Length (L)

300 mm

Height (H)

530 mm

Mass

Approx. 15 kg

RFID characteristics

Operating frequency

125 kHz

Safety specification

CE marking applied

*1 For details about power cable and PW02, see the Instruction Manual for PW02.

IFS-NX Product Specifications

9-2-5 Intelli stocker

(1) For a mechanical tape feeder

This is a storage stand to store a feeder equipped with the reading function of an RFID and can

be moved with casters. (An Intelli stocker can be attached (or stored) on a feeder that does not

support any RFID.)

120 units can be stored at 8-mm feeder conversion. (Three-floor type, but it is used as a

two-floor type when a large-size feeder is installed.)

Power

supply *1

Voltage

Single-phase 100 to 240 V AC

10%

Frequency

50/60 Hz

Apparent power

45 VA

Dimension

Width (W)

850 mm or less *2

Length (L)

1,500 mm or less *3

Height (H)

1,350 mm or less *4

Mass

94 kg

Safety specification

CE marking applied

*1 A power cable of the Japanese specification is supplied with the Intelli trolley pool. (The

power cable of the overseas specification needs to be arranged at the site.)

*2 A size of a carrying handle is not included.

*3 A convex shape part of a reel retainer section is included.

*4 This indicates the height of the level area of a mechanical tape feeder main unit.

(2) For an electric tape feeder

This is a storage stand to store a feeder for an electric bank equipped with the reading function

of an RFID and can be moved with casters.

80 feeders (converted in terms of 8-mm feeders) can be stored.

Power

supply *1

Voltage

Single-phase 100 to 240V AC

10%

Frequency

50/60 Hz

Apparent power

45 VA

Dimension

Width (W)

950 mm or less *2

Length (L)

1,500 mm or less *3

Height (H)

1,200 mm or less *4

Mass

80 kg

Safety specification

CE marking applied

*1 A power cable of the Japanese specification is supplied with the Intelli trolley pool. (The

power cable of the overseas specification needs to be arranged at the site.)

*2 A size of a carrying handle is included. The full width of only a main unit is 830 mm.

*3 A convex shape part of a reel retainer section is included.

*4 It shall indicate the height of the topside of the fall-prevention-type horizontally-sliding

section level area of the feeder.

9-2-6 Intelli feeder calibration jig with a monitor

It is a feeder calibration jig with a monitor that supports an RFID.

Recognition of a feeder ID and record of an inspection day are performed automatically, and working

efficiency improves.

IFS-NX Product Specifications

Component code/PWB code specifications

The various code specifications used in IFS-NX are specified below:

Code type and device to read a code

The relation between each code type and the device to read a code is as follows:

Reading device

Code type

1D 2D

Various

readers on a

machine side

Barcode

reader

Handy

terminal

Component code

○

－

○

PWB code

○

Other various codes

(Feeder, location, position

and others)

○ ○ － ○ ○

Unusable characters

The following seven characters are unsupported.

Unsupported characters: &, <, >, ·, “, ‘, #

Component code

10-3-1 Features

- A wide variety of component labels used in a factory can be supported. Component vender

labels and component user labels can be used regardless of existence of a unique ID.

- A user can select which label format is to be used: a label format currently pasted or a label

format defined with the IFS-NX. To create another original label format and print it, use a third

party’s software package.

- A barcode format including a header or two or more lines of data fields can be defined.

- 1D and 2D codes are supported.

10-3-2 Component labeling method

The method for labeling components supported with the IFS-NX is as follows:

No reattachment of a label

The label of a manufacturer or vendor of components is used in a factory, and a new label is

neither printed nor attached by a user. This label is called a "supplier" label.

Printing a user label (no serial number (unique ID))

Many users reattach component labels when components are put in storage or taken out from the

storage to the floor where they are to be mounted on boards. This “user” label contains a “user”

part number as well as other fields. In many cases, this differs from the part number (supplier part

number) on a supplier label. When this label does not contain any serial number, the system

cannot perform the “Traceability” function for each component, track the number of remaining

components for inventory control, or perform the “MSD Control” function. In many cases, a user

label is printed using a user's ERP/MRP/MES solution.