IFS-NX_SPE_EN.pdf - 第47页

IFS - NX P rodu ct S pecificat ions 43 Compone nt code/ PWB code spec ifications The various c ode specificat ions used in IFS - NX are specif i ed below : C od e typ e an d dev ic e to r ead a cod e The relation bet wee…

100%1 / 54
IFS-NX Product Specifications
42
9-2-5 Intelli stocker
(1) For a mechanical tape feeder
This is a storage stand to store a feeder equipped with the reading function of an RFID and can
be moved with casters. (An Intelli stocker can be attached (or stored) on a feeder that does not
support any RFID.)
120 units can be stored at 8-mm feeder conversion. (Three-floor type, but it is used as a
two-floor type when a large-size feeder is installed.)
Power
supply *1
Voltage
Single-phase 100 to 240 V AC
±
10%
Frequency
50/60 Hz
Apparent power
45 VA
Dimension
Width (W)
850 mm or less *2
Length (L)
1,500 mm or less *3
Height (H)
1,350 mm or less *4
Mass
94 kg
Safety specification
CE marking applied
*1 A power cable of the Japanese specification is supplied with the Intelli trolley pool. (The
power cable of the overseas specification needs to be arranged at the site.)
*2 A size of a carrying handle is not included.
*3 A convex shape part of a reel retainer section is included.
*4 This indicates the height of the level area of a mechanical tape feeder main unit.
(2) For an electric tape feeder
This is a storage stand to store a feeder for an electric bank equipped with the reading function
of an RFID and can be moved with casters.
80 feeders (converted in terms of 8-mm feeders) can be stored.
Power
supply *1
Voltage
Single-phase 100 to 240V AC
±
10%
Frequency
50/60 Hz
Apparent power
45 VA
Dimension
Width (W)
950 mm or less *2
Length (L)
1,500 mm or less *3
Height (H)
1,200 mm or less *4
Mass
80 kg
Safety specification
CE marking applied
*1 A power cable of the Japanese specification is supplied with the Intelli trolley pool. (The
power cable of the overseas specification needs to be arranged at the site.)
*2 A size of a carrying handle is included. The full width of only a main unit is 830 mm.
*3 A convex shape part of a reel retainer section is included.
*4 It shall indicate the height of the topside of the fall-prevention-type horizontally-sliding
section level area of the feeder.
9-2-6 Intelli feeder calibration jig with a monitor
It is a feeder calibration jig with a monitor that supports an RFID.
Recognition of a feeder ID and record of an inspection day are performed automatically, and working
efficiency improves.
IFS-NX Product Specifications
43
Component code/PWB code specifications
The various code specifications used in IFS-NX are specified below:
Code type and device to read a code
The relation between each code type and the device to read a code is as follows:
Reading device
Code type
1D 2D
Various
readers on a
machine side
Barcode
reader
Handy
terminal
Component code
○
○
－
○
○
PWB code
○
○
○
○
○
Other various codes
(Feeder, location, position
and others)
○ ○ － ○ ○
Unusable characters
The following seven characters are unsupported.
Unsupported characters: &, <, >, ·, “, ‘, #
Component code
10-3-1 Features
- A wide variety of component labels used in a factory can be supported. Component vender
labels and component user labels can be used regardless of existence of a unique ID.
- A user can select which label format is to be used: a label format currently pasted or a label
format defined with the IFS-NX. To create another original label format and print it, use a third
party’s software package.
- A barcode format including a header or two or more lines of data fields can be defined.
- 1D and 2D codes are supported.
10-3-2 Component labeling method
The method for labeling components supported with the IFS-NX is as follows:
No reattachment of a label
The label of a manufacturer or vendor of components is used in a factory, and a new label is
neither printed nor attached by a user. This label is called a "supplier" label.
Printing a user label (no serial number (unique ID))
Many users reattach component labels when components are put in storage or taken out from the
storage to the floor where they are to be mounted on boards. This “user” label contains a “user”
part number as well as other fields. In many cases, this differs from the part number (supplier part
number) on a supplier label. When this label does not contain any serial number, the system
cannot perform the “Traceability” function for each component, track the number of remaining
components for inventory control, or perform the “MSD Control” function. In many cases, a user
label is printed using a user's ERP/MRP/MES solution.
IFS-NX Product Specifications
44
Printing an IFS-NX label (with a serial number (unique ID))
If you print and attach IFS-NX labels (with a serial number) on a used reel when components are
put in storage, when they are taken out from the storage to the floor where they are to be mounted
on boards, or after a job finishes, the system can perform the “Traceability” function for each
component, track the number of remaining components for inventory control, or perform the “MSD
Control” function.
Printing a user label (with a serial number (unique ID))
Since a user label contains a serial number in this case, the system can perform the “Traceability”
function for each component, track the number of remaining components for inventory control, or
perform the “MSD Control” function. You do not have to attach any IFS-NX label additionally.
10-3-3 Usable component code type
The system can use component codes that can be read with a barcode reader and a handy terminal.
Refer to the specifications of each device for codes that can be read with it.
10-3-4 Component code field definition
The main examples of the definable fields in a component code are shown below:
Field name
Identifier
Description
Maximum length
Part Number
<PN>
Stands for a part number.t
corresponds to a component name
of a production program.
60 half-size
alphanumeric
characters
Supplier Part Number
<SPN>
Stands for a supplier part number.
250 half-size
alphanumeric
characters
Lot Number
<LOT>
Stands for a lot number (not
unique).
250 half-size
alphanumeric
characters
Unique Sequence
Number
<UID>
Stands for a unique sequence
number (a part of lot) and an item
that is combined with a lot number.
250 half-size
alphanumeric
characters