KY Config_Manual_ENG_Final.pdf - 第20页
3. C ODE I NPUT This chapter describes a p op-up window displayed by clicking the CODE INPUT button on the main screen. Click the CODE INPUT button; a pop-up window below appears . The above figure is a pop-up wind ow fo…
The table below shows the items shown in the upper side of the figure above.
Field Name
Field Description
1. User Name
User ID
2. Level
User password
3. Code
Code assigned to the user
The table below shows the items on the lower side of the figure above.
Field Name
Field Description
4. Input Code
Click this to enter the code corresponding to the user.
Click the button; a pop-up window below appears.
This pop-up window is an input box for entering a code. Enter the code provided when you purchased the
machine in the blank and click OK.
5. Save
Click this to save the current data.
6. Cancel
Click this to cancel the current job and go back to the previous screen.
3. CODE INPUT
This chapter describes a pop-up window displayed by clicking the CODE INPUT button on the main screen.
Click the CODE INPUT button; a pop-up window below appears.
The above figure is a pop-up window for entering the user code.
4. BARCODE SETTING WINDOW
This chapter describes the items displayed by clicking the Barcode Setting button on the main screen.
4.1. Basic Tab
This section describes the items displayed by clicking the Basic tab in the pop-up window displayed by clicking Barcode Setting button on the main screen.
The following table shows the items in the Basic tab.
Field Name
Field Description
1.Barcode Usage
Enables the barcode reader to be used. Select the type of barcode reader.
• Inline Barcode: Select this to use the Inline Barcode Reader.
1
5
2
3
4
6
7
8