00191021-02.pdf - 第101页

User’s Manual Test Program SITEST 2 Functions for t he Adjustment of the Machine Software Version 403.xx Edition 12/97 2.7 Wafflepack Changer Functions 2 - 37 ● In the " Axis" field act ivate the radio bu tton …

2 Functions for the Adjustment of the Machine User’s Manual Test Program SITEST

2.7 Wafflepack Changer Functions Software Version 403.xx Edition 12/97

2 - 36

2.7.1 Wafflepack Changer Settings

CAUTION

∆

The improper performance of the settings described in the following may result in the wafflepack changer

becoming so maladjusted that it is no longer operable.

●

In the "Wafflepack Changer" display (see Fig. 2.7.1) click on the icon to switch to the

"WPC settings" display.

Fig. 2.7.2 "WPC settings" Display

The following functions are available in this display:

–

Change to edit the transfer position

–

Measure to determine and store the transfer position

–

Teach ("Transfer position" field)to teach and accept the transfer position

–

Teach ("Zero point cor.value" field)to teach and accept the zero point position

–

Limit switch + to check the maximum limit switch position

–

Limit switch - to check the minimum limit switch position

–

Reference Bero to check the position of the reference Bero

User’s Manual Test Program SITEST 2 Functions for the Adjustment of the Machine

Software Version 403.xx Edition 12/97 2.7 Wafflepack Changer Functions

2 - 37

●

In the "Axis" field activate the radio button of the axis (feed axis or lifting axis) for which you wish to

perform settings or carry out checks.

●

If you wish to change, measure or teach the value for the transfer position (component pick-up posi-

tion from the wafflepack tray), activate the radio button of the feed axis first.

●

Click on the appropriate button in the "Transfer position" field and carry out the steps required for the

selected function.

●

If you wish to change the zero point position, click on the

Teach

button in the "Zero point cor.value"

field and move the active axis to the desired position using the arrow keys. When the teaching proce-

dure is completed, a message box is displayed.

●

Click on the

Yes

button if the current position is to be accepted as the new zero point.

●

If you wish to check the position of a limit switch or of the reference Bero, remove all tray carriers from

the tray storage unit first.

●

Click on the button of the desired function in the "Check position" field and carry out any activities that

may be required during the check.

2 Functions for the Adjustment of the Machine User’s Manual Test Program SITEST

2.7 Wafflepack Changer Functions Software Version 403.xx Edition 12/97

2 - 38