00193463-01.pdf - 第144页
4 Component handling User Manual SIPLACE S-25 HM 4.5 Used tape c utter Software Vers ion SR.503.xx 04/2002 US E dition 144 4.5 Use d t ape cutter 4.5.1 Gener al The place ment syst em has a us ed tape cutter a t each of …
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.4 Tape container
143
4.4 Tape container
4.4.1 Overview
Reels up to 15" in diameter may be used, although for 15" reels you should use spindles as well.
Insert the spindles into the partitions as shown in Fig. 4.4 - 1. 4
PLEASE NOTE 4
We recommend that you use spindles if the tape reel diameter exceeds 5". This will ensure that
the feeders operate reliably. 4
Fig. 4.4 - 1 Component table and tape container
(1) Component changeover table
(2) Spindle
(3) Waste tape container
(4) Partition
(5) Tape container
4 Component handling User Manual SIPLACE S-25 HM
4.5 Used tape cutter Software Version SR.503.xx 04/2002 US Edition
144
4.5 Used tape cutter
4.5.1 General
The placement system has a used tape cutter at each of the two component table locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component table. 4
Æ Empty the waste tape container every day.
Fig. 4.5 - 1 Used tape cutter
(1) Stationary cutting blade
(2) Retainer
(3) Moving cutting blade
(4) Electronic control unit
(5) Short stroke cylinder
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.5 Used tape cutter
145
4.5.2 Inserting the tape into the tape cutter
4
Fig. 4.5 - 2 Inserting the tape into the tape cutter
(1) Used tape channel
(2) Used tape
(3) To used tape cutter