00193463-01.pdf - 第155页
User Manual SIPLAC E S-25 HM 4 Component han dling Software Version SR.503.xx 04/2002 US Edition 4.7 Matrix tray changer 155 4.7.4.2 Electrical rat ings 4 4.7.4.3 Noise emissions 4 4.7.4.4 Permissible ambient facto rs 4 …
4 Component handling User Manual SIPLACE S-25 HM
4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition
154
4.7.3 Principle of the matrix tray changer
The matrix tray changer can be used to store and change up to 80 waffle trays fully automatically.
The levels (storage locations in the towers) for the waffle trays are numbered consecutively in
ascending order from bottom to top.
The towers move independently of one another in the vertical direction until the selected
magazine is within range of the feed axis. The feed axis transports the waffle tray from the tower
into the access area of the placement head.
4.7.4 Technical data, matrix tray changer
4.7.4.1 Dimensions, weight, other data
4
4
4
4
Dimensions (L x W x H) 1350 mm x 775 mm x 1499 mm
Weight (basic equipment) approx. 500 kg (incl. cassettes and waffle pack
tray carriers)
Weight (partly equipped) approx. 532 kg (including components)
Weight (fully equipped) approx. 600 kg (incl. tape reels and feeders)
Weight (moved mass) approx. 43.5 kg per tower
Cassette size (L x W x H) 354.1 mm x 154.8 mm x 131 mm
Weight of cassette approx 7.5 kg
Vertical stroke 502.5 mm (1st to 40th waffle pack tray carrier)
Horizontal stroke approx. 640 mm (between reference position and
component position)
Spacing from one level to next 11 mm
Spacing from one cassette to next 134.5 mm
Storage capacity 80 waffle pack tray carriers for waffle pack maga-
zines
Waffle pack tray carrier
Size (L x W x H)
Changeover time (over 5 levels)
371 mm x 146 mm x 10.1 mm
2 s
Load per unit area on mounting foot/roll 2.78 kg/cm²
or 4.01 kg/cm² (fully equipped)
Minimum component size (L x W) 5 mm x 5 mm
Maximum component size 15.5 mm (When using components larger than
7.62 mm remove every second waffle pack tray
carrier)
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.7 Matrix tray changer
155
4.7.4.2 Electrical ratings
4
4.7.4.3 Noise emissions
4
4.7.4.4 Permissible ambient factors
4
4.7.5 Operation, maintenance, service
The manuals supplied with the matrix tray changer contain extensive documentation on how to
operate, maintain and service the matrix tray changer. 4
4
Supply voltage 3 x 400 V, 50 Hz (Europe)
3 x 208 V, 60 Hz (USA)
Total power 3.5 kW
Rated current 2.7 A @ 3 x 400 VAC
4.2 A @ 3 x 208 VAC
Fuse 3 x 16 A
Rated current consumption of largest consumer 2 A
Maximum noise generation 80 dB (A)
Room temperature Between 15 °C and 35 °C
Atmospheric humidity 30 - 75%
(but no higher than 45% on average in order to prevent
any possibility of condensation on the machine).
4 Component handling User Manual SIPLACE S-25 HM
4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition
156
4.7.6 Safety instructions for coupling and uncoupling the matrix tray changer
4
Fig. 4.7 - 3 Safety instructions for coupling and uncoupling the matrix tray changer
(1) Gap when the matrix tray changer is coupled
(2) Matrix tray changer control cable
(3) Control cable for component feeder table
(4) Power supply connection