00193463-01.pdf - 第152页

4 Component handling User Manual SIPLACE S-25 HM 4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition 152 4.7.2 Gener al The use of flatpack IC s is bec oming an incr easingl y signi ficant as pect in t …

100%1 / 226
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.7 Matrix tray changer
151
4.7 Matrix tray changer
4.7.1 Overview
Fig. 4.7 - 1 Matrix tray changer, back view
(1) Main switch
(2) Emergency stop mushroom-head push-button
(3) Tower 1 for up to 40 waffle trays
(4) Tower 2 for up to 40 waffle trays
(5) Feed axis 1
(6) Feed axis 2
4 Component handling User Manual SIPLACE S-25 HM
4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition
152
4.7.2 General
The use of flatpack ICs is becoming an increasingly significant aspect in the production of flat
modules. These components are now almost exclusively provided in waffle trays.
The space required by waffle trays is relatively large in comparison to the component density,
however.
The low component capacity also requires the waffle trays to be changed frequently, which
means that the placement sequence has to be interrupted if the trays are changed manually.
The use of a matrix tray changer eliminates this unnecessary time loss since the waffle trays are
stored and automatically changed. Programmable, random access to up to 2 x 40 waffle trays
also increases the range of components that can be made available.
PLEASE NOTE: 4
The matrix tray changer can be coupled at location 1 on the right-hand side of the machine and/
or at location 3 on the left-hand side of the machine. It does not take up the whole width of a
location. The component feeder table integrated into the matrix tray changer (see item 2 in Fig.
4.7 - 2) has a capacity of 9 feeder locations. 4
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.7 Matrix tray changer
153
Fig. 4.7 - 2 Matrix tray changer, front view
(1) Tape container
(2) Integral component feeder table with 9 locations
(3) Waste tape container
(4) Guard for the inside of the SIPLACE machine
(5) Display panel for statuses, warning and faults