00193463-01.pdf - 第156页

4 Component handling User Manual SIPLACE S-25 HM 4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition 156 4.7.6 Safety inst ructions for coupli ng and uncoupl ing the matrix tray changer 4 Fig. 4.7 - 3 S…

100%1 / 226
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.7 Matrix tray changer
155
4.7.4.2 Electrical ratings
4
4.7.4.3 Noise emissions
4
4.7.4.4 Permissible ambient factors
4
4.7.5 Operation, maintenance, service
The manuals supplied with the matrix tray changer contain extensive documentation on how to
operate, maintain and service the matrix tray changer. 4
4
Supply voltage 3 x 400 V, 50 Hz (Europe)
3 x 208 V, 60 Hz (USA)
Total power 3.5 kW
Rated current 2.7 A @ 3 x 400 VAC
4.2 A @ 3 x 208 VAC
Fuse 3 x 16 A
Rated current consumption of largest consumer 2 A
Maximum noise generation 80 dB (A)
Room temperature Between 15 °C and 35 °C
Atmospheric humidity 30 - 75%
(but no higher than 45% on average in order to prevent
any possibility of condensation on the machine).
4 Component handling User Manual SIPLACE S-25 HM
4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition
156
4.7.6 Safety instructions for coupling and uncoupling the matrix tray changer
4
Fig. 4.7 - 3 Safety instructions for coupling and uncoupling the matrix tray changer
(1) Gap when the matrix tray changer is coupled
(2) Matrix tray changer control cable
(3) Control cable for component feeder table
(4) Power supply connection
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.7 Matrix tray changer
157
WARNING 4
Æ NEVER place your hand in the gaps between the matrix tray changer and machine frame (item
1) while the machine is running.
Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the
matrix tray changer control cable at the machine socket (item 2).
Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the
control cable for the matrix tray changer’s integral component feeder table at the machine
socket (item 3).
Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the
power cable from the external power supply (item 4).
Æ NEVER operate the matrix tray changer if it is not coupled to the machine.