00193463-01.pdf - 第158页

4 Component handling User Manual SIPLACE S-25 HM 4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition 158

User Manual SIPLACE S-25 HM 4 Component handling

Software Version SR.503.xx 04/2002 US Edition 4.7 Matrix tray changer

157

WARNING 4

Æ NEVER place your hand in the gaps between the matrix tray changer and machine frame (item

1) while the machine is running.

Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the

matrix tray changer control cable at the machine socket (item 2).

Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the

control cable for the matrix tray changer’s integral component feeder table at the machine

socket (item 3).

Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the

power cable from the external power supply (item 4).

Æ NEVER operate the matrix tray changer if it is not coupled to the machine.

4 Component handling User Manual SIPLACE S-25 HM

4.7 Matrix tray changer Software Version SR.503.xx 04/2002 US Edition

158

User Manual SIPLACE S-25 HM 5 Station extensions

Software Version SR.503.xx 04/2002 US Edition 5.1 Nozzle changer for the 12-segment Collect&Place head

159

5 Station extensions

5.1 Nozzle changer for the 12-segment Collect&Place

head

5.1.1 Overview

The placement system is supplied as standard with two Collect&Place heads. As an option, a noz-

zle changer can be installed for each Collect&Place head. This enables the nozzle configuration

to be changed quickly, thus allowing the Collect&Place head to be quickly adapted to the needs

of the placement process. 5

The nozzle changer consists of at least one, and up to eight magazines, each with twelve nozzle

garages (see Fig. 5.1 - 1). The magazines are seated on a common support and each magazine

is centered using two parallel pins and fixed in place with a spring hook. 5

NOTE:

Please refer to Section 5.9 on page 193 for information on the the nozzle changer for the 6-seg-

ment Collect&Place head. 5

5.1.2 Technical data

Nozzle changer for the 12-segment Collect&Place head

Dimensions (length x width x height) 282 mm x 214 mm x 107 mm

Number of nozzle garages Min. 12 / max. 96

Nozzle types 9xx

Time required to open and close the locking plate < 200 ms

Capacity of the reject bin Approx. 50 nozzles

Pneumatic circuit Compressed air line 5.3 bar