JO-072-006_w.pdf - 第103页

4-17 AKBEG-ID The ducial mark position is based on the X/Y coordinates of the computer screen and almost located at the coordinates in the following table. T able D4 Models X Y G*-0808* - 3.650 - 13.000 G*-12160 or more…

100%1 / 137
4-16
AKBEG-ID
(11) The ducial mark position of the feeder is measured.
The following dialog box appears for three seconds.
Fig. D18
(12) Move the micrometer until the hole at the ducial mark position is
aligned with the center of the crosshair.
4
2
4
2
4 8
12
Direction of Tape Feed
Fiducial Mark Position of
G*-12160 or more
(G*-24320 used in the figure)
Fiducial Mark Position
of G*-0808*
Fig. D19 Position of Fiducial Mark
0809-002
2. Feeder Measurement
4-17
AKBEG-ID
The ducial mark position is based on the X/Y coordinates of the computer
screen and almost located at the coordinates in the following table.
Table D4
Models X Y
G*-0808*
-
3.650
-
13.000
G*-12160 or more
-
13.950
-
13.000
Align the hole at the
fiducial mark position
with the center of the
crosshair.
X/Y Position on
Computer Screen
Fig. D20
(13) Press the [Space] key on the keyboard or the [X/Y Measurement]
button in the window to perform the measurement of the ducial mark
position.
(14
) Then, measure the pickup position.
The following dialog box appears for three seconds.
Fig. D21
0508-001
2. Feeder Measurement
4-18
AKBEG-ID
(15) Move the micrometer until the hole of the master tape is aligned with
the center of the crosshair.
As for the 8 mm feeder, it must be aligned with the pickup position on
Lane #1.
8 mm Tape Feeder
Lane #1
Lane #2
Fig. D22
The pickup position of each model is based on the X/Y coordinates of the
computer screen and almost located at the coordinates in the following
table.
Move the cursor to the position where the hole of the master tape can be
visible perfectly and perform the measurement.
As for the Y direction, the position varies by 0.5 mm (8 mm feeder) and 1
mm (12 mm or wider feeder).
Ref.:
Th
e variation occurs because the lane origin offset is set to "0" (zero)
at the measurement.
Table D5
Models X Y
G*-0808*
Lane #1 0.000 0.000
Lane #2 9.500 0.000
G*-12160 4.100
-2.00
G*-24320 -2.600 -6.000
G*-44
560 -8.600 -14
.000
0512-002
2. Feeder Measurement