JO-072-006_w.pdf - 第21页

Safety Precautions Safe-12 AKBEG-ID 5. Precautionary Items for Correct Operations Requirements for Installation l A void any place that vibrates severely . l The ambient temperatures must be 20±10°C and humidit y 30 to 8…

100%1 / 137
Safe-11
AKBEG-ID
Safety Precautions
Alert Indications described as " CAUTION " (continued)
Alert Description Related Items
If you detach the tape feeder with the master tapes
being attached from jig, you may cut your nger with
sharp edges of the master tapes or damage the tapes by
bending the master tapes, etc.
Be sure to detach the master tapes rst, then the tape
feeder from the jig.
Section 4
2. Feeder
Measurement
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the tape
edges.
Section 4
2. Feeder
Measurement
0508-001
CAUTION
Safety Precautions
Safe-12
AKBEG-ID
5. Precautionary Items for Correct Operations
Requirements for Installation
l
Avoid any place that vibrates severely.
l
The ambient temperatures must be 20±10°C and humidity 30 to 80%.
Any dew
condensation must be avoided.
When the machine is transferred to another place and the ambient temperature rises more
than the surface of the machine, dew may condense under the condition described below.
Note that dew condensation may cause the machine to break down.
Condition of Dew Condensation
Dew may condense when the difference (based on "Humidity (%)") between the ambient
temperature of the destination (the place where the machine was transferred) and the
surface temperature of the machine reaches the values or more in the table below.
Humidity (%) of Destination
Differences between Ambient Temperature
of Destination and Surface Temperature of
Machine
80 3 °C or more
70 6 °C or more
60 8 °C or more
50 10 °C or more
4
0 1
4 °C or more
30 18 °C or more
l
Ensure that the selected place is free of electric noise, etc.
Precautionary measures (prevention of noise generation
, etc.,) must be taken for other
equipment to prevent the machine from malfunctioning.
l
Do not expose the machine to combustible or corrosive g
as.
l
Select a place free of lamp soot and dust.
0508-001
Safe-13
AKBEG-ID
Safety Precautions
Power Supply
Conrm that the following power is supplied to this jig.
l
Voltage : 100
V±10% AC or 200 V±10% AC
Fluctuating voltage and noise in the power line can have not only a bad inuence on the
machine but also trigger a malfunction of the machine, causing an accident.
Take necessary measures to prevent the other equipment from generating noises.
l
The preparation and connection of the primary power unit must be made on the
customer side.
Power Failure
Instantaneous voltage drop due to power failure or lightning will cause the built-in
computer to break down and the basic and application programs to corrupt.
It is recommended that a DC uninterruptive power supply be used as a countermeasure
against instantaneous voltage drop.
Provided Personal Computer
The provided personal computer is used to save or output the measured data. When the
power is cut off while the computer is working (computer being accessed), the computer
may break down, causing the stored data and software programs to corrupt.
Reference
Refer to "2.2 Ending the Program" in "Section 2" for details.
0508-001