JO-072-006_w.pdf - 第19页

Safety Precautions Safe-10 AKBEG-ID Alert Indications described as " CAUTION " Alert Description Related Items At least two people are needed to install the feeder adjusting jig. The jig is very heavy . Be sure…

100%1 / 137
Safe-9
AKBEG-ID
Safety Precautions
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " WARNING "
Alert Description Related Items
Those who wear implanted pacemakers should not
handle the tape feeders.
Permanent magnets are used in the tape feeders. The
pacemaker may be affected by the magnetism, causing a
serious accident.
Section 4
2. Feeder
Measurement
0508-001
WARNING
Safety Precautions
Safe-10
AKBEG-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
At least two people are needed to install the feeder
adjusting jig.
The jig is very heavy. Be sure not to drop it. Otherwise,
your hands and/or feet will get hurt or the jig may be
damaged.
Section 2
1. Procedure for
Jig Installation
•
The pickup position master is very heavy
. Be sure not
to drop it. Otherwise, your feet will get hurt or the jig
may be damaged.
•
The LED illumination unit uses a Class 2 laser beam.
Do not expose your eyes directly the laser radiation.
Otherwise, your eyes will be injured.
Section 4
1. Registration
of Master
Position
(Jig Origin
Adjustment)
•
Be sure not to drop any tape feeder
. Otherwise, your
feet will get hurt or the feeder may be damaged.
Do not handle more than two tape feeders at a time and
never drop any feeder.
•
When you install a tape feeder on the adjustment
base, avoid getting your ngers caught between the
end of the feeder and the adjustment base and the
connectors.
•
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the
tape edges.
Section 4
2. Feeder
Measurement
A
void getting your nger caught in the toggle clamp while
fastening the tape feeder to the jig.
Section 4
2. Feeder
Measurement
Carefully handle the pry-type dial gauge because the tip of
the probe is very sharp.
Your hand will get injured if the tip
is inserted.
Section 4
3.2 Measuring
Method
0508-001
CAUTION
Safe-11
AKBEG-ID
Safety Precautions
Alert Indications described as " CAUTION " (continued)
Alert Description Related Items
If you detach the tape feeder with the master tapes
being attached from jig, you may cut your nger with
sharp edges of the master tapes or damage the tapes by
bending the master tapes, etc.
Be sure to detach the master tapes rst, then the tape
feeder from the jig.
Section 4
2. Feeder
Measurement
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the tape
edges.
Section 4
2. Feeder
Measurement
0508-001
CAUTION