JO-072-006_w.pdf - 第20页

Safe-1 1 AKBEG-ID Safety Precautions Alert Indications described as " CAUTION " (continued) Alert Description Related Items If you detach the tape feeder with the master tapes being attached from jig, you may c…

100%1 / 137
Safety Precautions
Safe-10
AKBEG-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
At least two people are needed to install the feeder
adjusting jig.
The jig is very heavy. Be sure not to drop it. Otherwise,
your hands and/or feet will get hurt or the jig may be
damaged.
Section 2
1. Procedure for
Jig Installation
•
The pickup position master is very heavy
. Be sure not
to drop it. Otherwise, your feet will get hurt or the jig
may be damaged.
•
The LED illumination unit uses a Class 2 laser beam.
Do not expose your eyes directly the laser radiation.
Otherwise, your eyes will be injured.
Section 4
1. Registration
of Master
Position
(Jig Origin
Adjustment)
•
Be sure not to drop any tape feeder
. Otherwise, your
feet will get hurt or the feeder may be damaged.
Do not handle more than two tape feeders at a time and
never drop any feeder.
•
When you install a tape feeder on the adjustment
base, avoid getting your ngers caught between the
end of the feeder and the adjustment base and the
connectors.
•
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the
tape edges.
Section 4
2. Feeder
Measurement
A
void getting your nger caught in the toggle clamp while
fastening the tape feeder to the jig.
Section 4
2. Feeder
Measurement
Carefully handle the pry-type dial gauge because the tip of
the probe is very sharp.
Your hand will get injured if the tip
is inserted.
Section 4
3.2 Measuring
Method
0508-001
CAUTION
Safe-11
AKBEG-ID
Safety Precautions
Alert Indications described as " CAUTION " (continued)
Alert Description Related Items
If you detach the tape feeder with the master tapes
being attached from jig, you may cut your nger with
sharp edges of the master tapes or damage the tapes by
bending the master tapes, etc.
Be sure to detach the master tapes rst, then the tape
feeder from the jig.
Section 4
2. Feeder
Measurement
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the tape
edges.
Section 4
2. Feeder
Measurement
0508-001
CAUTION
Safety Precautions
Safe-12
AKBEG-ID
5. Precautionary Items for Correct Operations
Requirements for Installation
l
Avoid any place that vibrates severely.
l
The ambient temperatures must be 20±10°C and humidity 30 to 80%.
Any dew
condensation must be avoided.
When the machine is transferred to another place and the ambient temperature rises more
than the surface of the machine, dew may condense under the condition described below.
Note that dew condensation may cause the machine to break down.
Condition of Dew Condensation
Dew may condense when the difference (based on "Humidity (%)") between the ambient
temperature of the destination (the place where the machine was transferred) and the
surface temperature of the machine reaches the values or more in the table below.
Humidity (%) of Destination
Differences between Ambient Temperature
of Destination and Surface Temperature of
Machine
80 3 °C or more
70 6 °C or more
60 8 °C or more
50 10 °C or more
4
0 1
4 °C or more
30 18 °C or more
l
Ensure that the selected place is free of electric noise, etc.
Precautionary measures (prevention of noise generation
, etc.,) must be taken for other
equipment to prevent the machine from malfunctioning.
l
Do not expose the machine to combustible or corrosive g
as.
l
Select a place free of lamp soot and dust.
0508-001