JO-072-006_w.pdf - 第96页

4-10 AKBEG-ID (5) Attach the master tapes to the tape feeder and set the feeder on the adjustment base of the jig. Master T apes Fig. D1 1 Master T ape Setting (For 8 mm T ape Feeder) Reference Refer to "2.1 Attachm…

100%1 / 137
4-9
AKBEG-ID
(4) Press the [Meas] button. The "Measurement" window opens.
Fig. D10 "Measurement" Window
(a) Use the following master tape respectively for each model.
(b) A master tape is required to be purchased for the measurement.
Contact the marketing department or sales agency of Hitachi High-
Technologies for the details on the purchase arrangements.
Reference
(a) Refer to "6. "Measurement" Window" in "Section 3" for the details of
the "Measurement" window.
(b) Refer to "2.4 Tape Guide and Support Suppressor" in the instruction
manual "Tape Feeders for GXH Series" for details.
Table D2
Models Master Tape JG Nos. Part No. Tape Width Required Q'ty
GT-*808*
GD-*808*
JG-0009-12 630 138 8625 8 mm 2 pcs.
GD-18083
JG-0009-15 630 167 8344 8 mm 2 pcs.
GT-1216*
GD-1216*
JG-0009-4 630 096 5582 16 mm 1 pc.
GT-2432*
GD-2432*
JG-0009-6 630 096 5599 32 mm 1 pc.
GT-4456*
GD-4456*
JG-0009-8 630 134 6601 44 mm 1 pc.
0809-003
2. Feeder Measurement
4-10
AKBEG-ID
(5) Attach the master tapes to the tape feeder and set the feeder on the
adjustment base of the jig.
Master Tapes
Fig. D11 Master Tape Setting (For 8 mm Tape Feeder)
Reference
Refer to "2.1 Attachment and Detachment of Master Tapes" in "Section 4"
for how to attach the master tapes.
0508-001
2. Feeder Measurement
4-11
AKBEG-ID
WARNING
If you wear a pacemaker, do not handle the tape
feeders.
The tape feeders use permanent magnets. The
pacemaker may be affected by the magnetism and a
serious accident will result.
CAUTION
•
Be sure not to drop any tape feeder. Otherwise,
your feet will get hurt or the feeder may be
damaged.
Carefully handle each tape feeder and never drop any.
•
When you install a tape feeder on the adjustment
base, avoid getting your ngers caught between
the end of the feeder and the adjustment base and
the connectors.
•
The master tapes are made of a thin metal.
Carefully handle the tapes to avoid cutting your
nger with the tape edges.
CAUTION
Conrm that the hook at the end of the tape feeder
is securely engaged and the suppressor is not set
aoat.
630 128 0127
00-0115-
Feeder Fixing Areas
Toggle Clamp Between End of Feeder and Adjustment Base
Fig. D12
0508-001
2. Feeder Measurement