JO-072-006_w.pdf - 第56页
3-3 AKBEG-ID 1.2 Password Change (1) Press the [Authority Setting] button located on the upper right corner of the "T ype Listup" window . Fig. C3 (2) The "Password" window appears. Enter the password…
3-2
AKBEG-ID
(2) The "Password" window appears. Enter the password through keyboard
navigation.
After you have entered the password, press the [OK] button.
Fig. C2
Enter only alphanumeric characters.
Note that passwords are always case sensitive (sensitive to uppercase and
lowercase letters).
(3) When the entered password matches the previously stored password,
the [Authority Setting] button changes as follows.
When the [Authority Setting] button is pressed with the icon shown
below on the button, the authority returns to "User".
0508-001
1.1 Authority Change
3-3
AKBEG-ID
1.2 Password Change
(1) Press the [Authority Setting] button located on the upper right corner of
the "Type Listup" window.
Fig. C3
(2) The "Password" window appears. Enter the password (for
"Administrator") through keyboard navigation.
After the entry is completed, press the [OK] button.
Factory-Specied Passwords
Administrator :
bbb
Power User :
aaa
Fig. C4
(3) Press "
". Be sure not to select the [OK] button.
Fig. C5
1.2 Password Change
0508-001
Procedure
3-4
AKBEG-ID
(4) When the entered password matches the previously stored password,
the "Password" window appears, enabling you to change the password.
Note:
When a wrong password is entered, nothing appears.
Fig. C6
(5) Tick the "New Password (Administrator)" check box and enter a new
password.
Enter the same password in the "Conrmation" text box for the
conrmation and press the [OK] button.
Follow the same procedure for "Power User".
Both passwords (for "Administrator" and "Power User") can also be changed at
the same time.
Fig. C7
1.2 Password Change
0508-001