00197674-01-UM-E-Series-EN-12-2014.pdf - 第134页
3 Technical data and assemblies User manual SIPLACE E 3.6 PCB conveyor system From software version SC 708.0 12/2014 E dition 134 3.6 PCB conveyor system 3.6.1 Description The PCB conveyors are de signed as three-part c …
User manual SIPLACE E 3 Technical data and assemblies
From software version SC 708.0 12/2014 Edition 3.5 Placement head
133
3.5.6.2 Technical data
3
SIPLACE PP
with stationary
camera type 36 GigE
(Standard)
with stationary
camera type 33 GigE
(Fine pitch)
with stationary
camera type 25 GigE
(Flip chip)
Range of components
*a
*)a Please note that the range of components that can be placed is also affected by the pad geometry, customer-
specific standards, component packaging tolerances and component tolerances.
0603 to SO, PLCC,
QFP, BGA, special
components, bare dies,
flip-chips
0402 to SO, PLCC,
QFP, BGA, special
components, bare dies,
flip-chips
0201 to SO, PLCC,
QFP, sockets, plugs,
BGA, special compo-
nents, bare dies, flip-
chips, shields
Component specification
Max. height
*b
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
*c
*)b 19 mm if one nozzle of the CP12/CP6 is removed. 8.5 mm if no nozzle of the CP12/CP6 is removed.
*)c If standard nozzles are used
19 mm
0.4 mm
0.24 mm
0.56 mm
0.32 mm
1.6 x 0.8 mm²
32 x 32 mm²
(single measurement)
85 x 85 mm² or
max. 200 x 125 mm²
(with restrictions)
100 g
19 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 x 0.5 mm²
55 x 45 mm²
(single measurement)
85 x 85 mm² or
max. 200 x 125 mm²
(with restrictions)
100 g
19 mm
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6 x 0.3 mm²
16 x 16 mm²
(single measurement)
100 g
Programmable set-down
force 1.0 N - 15 N 1.0 N - 15 N 1.0 N - 15 N
Nozzle types 5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
X/Y accuracy
*d
*)d The accuracy value was measured using the vendor-neutral IPC standard
± 37.5 µm/3σ
± 50 µm/4σ
± 37.5 µm/3σ
± 50 µm/4σ
± 30 µm/3σ
± 40 µm/4σ
Angular accuracy ± 0.053°/3σ
± 0.071°/4σ
± 0.053°/3σ
± 0.071°/4σ
± 0.053°/3σ
± 0.071°/4σ
Illumination levels 6 6 6
Possible illumination level
settings
256
6
256
6
256
6
3 Technical data and assemblies User manual SIPLACE E
3.6 PCB conveyor system From software version SC 708.0 12/2014 Edition
134
3.6 PCB conveyor system
3.6.1 Description
The PCB conveyors are designed as three-part conveyors with input, processing and output con-
veyor sections. The input and output conveyor areas act as bumper zones for the boards in the
event of short waiting periods. For PCB-Detection sonar sensors are provided in the input, pro-
cessing and output area.
The PCB is stopped respectively in each area (processing area as well as buffers) by mechanical
stoppers, which are mounted along the conveyor rail. The conveyor rail can be rotated 180° and
use for opposite PCB flow direction. Right side or left side fixed is achieved by rotating the ma-
chine with 180° and changing the moving direction of the boards.
Item no. 03108391-xx Fixed conveyor rail right E
Item no. 003110457-xx Fixed conveyor rail left E
As soon as the circuit board has reached its target position, the conveyor belt is stopped and the
board is clamped.
The width of the circuit board conveyor is set and monitored by the station software.
The conveyor height can be selected on the machine to allow the machines to be integrated into
lines with a conveyor height of, 900 to 930 or 950 mm. The standard height is 930 mm.
The PCB conveyors communicate with the individual machines via the SMEMA interface.
User manual SIPLACE E 3 Technical data and assemblies
From software version SC 708.0 12/2014 Edition 3.6 PCB conveyor system
135
3.6.2 Design of the PCB single conveyor
3
Fig. 3.6 - 1 Design of the PCB single conveyor
(1) Input conveyor
(2) Processing conveyor
(3) Lifting table
(4) Output conveyor
(5) Conveyor control (under the cover)
(6) Output stopper
(7) Processing topper
(8) Input stopper
(1)
(3)
(4)
(2)
(5)
(7)
(8)
(6)