00197674-01-UM-E-Series-EN-12-2014.pdf - 第300页

7 Cleaning and Checking User manual SIPLACE E 7.1 Cleaning and Checking Interval s Base Machine From software v ersion SC 708.0 12/2014 Edition 300 7 7 Cleaning and Checking tasks Gantry Duration [min] Each week Every 3 …

100%1 / 308
User manual SIPLACE E 7 Cleaning and Checking
From software version SC 708.0 12/2014 Edition 7.1 Cleaning and Checking Intervals Base Machine
299
7 Cleaning and Checking
7
7
7.1 Cleaning and Checking Intervals Base Machine
7
CAUTION
Only qualified personnel
These cleaning and checking tasks may only be carried out by appropriately qualified
personnel.
Caution, as used in this user manual, means that slight injury or damage to equipment
may occur if the caution instructions are not followed.
CAUTION
Filter elements
The cleaning and checking intervals given for inspecting and replacing the filter elements
only apply to the specified compressed air quality (see
Section 3.2.4 on page 103). If
other qualities are used, the intervals should be shortened accordingly.
Cleaning and Checking tasks
Base machine
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
– Checking/Cleaning the Cover Fans
3X
– Checking the Fan on the MGCU
5X
– Checking the safety features on machines
4 (6) X
– Checking and Cleaning/Replacing (if required) the
Compressed Air Filter
2X
– Cleaning/Replacing the Head Exhaust Air Filter
1X
– Cleaning the Protective Covers
2X
– Checking/Cleaning/Replacing the Gas Pressure
Shock Absorbers on the Protective Covers
4X
7 Cleaning and Checking User manual SIPLACE E
7.1 Cleaning and Checking Intervals Base Machine From software version SC 708.0 12/2014 Edition
300
7
7
Cleaning and Checking tasks
Gantry
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
– Checking and Cleaning the Magnetic Surfaces of the
X and Y Axes
2X
– Cleaning the X Axis Loose Bearing and Contact Sur-
face. With use of cleaning cloth and IPA.
2X
– Cleaning the Y Axis Loose Bearing and Contact Sur-
face. With use of cleaning cloth and IPA.
2X
– Grease and clean the X axis guide bearing
2X
– Cleaning the Linear Guides of the X Axis
2X
– Grease and clean the Y axis guide bearing
2X
– Cleaning the Linear Guides of the Y Axis
2X
– Cleaning the X Axis Scale
2X
– Cleaning the Y Axis Scale
2X
– Replace the loose bearing lubrication system X axis
(if present)
2X
– Grease and clean the X and Y axis guide bearing
2X
Cleaning and Checking tasks
Conveyor
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
– Vacuuming the Transport, Nozzle Changer and Insert
1X
– Cleaning and Preserving the Conveyor
– Hexagonal shafts
– Linear guide rails
– Ball screws
– Guide shaft
11 X
User manual SIPLACE E 7 Cleaning and Checking
From software version SC 708.0 12/2014 Edition 7.1 Cleaning and Checking Intervals Base Machine
301
7
7
7
a) This value is for 3 shift operation (7500 hours of operation). Longer intervals can be planned for other operation setups.
Cleaning and Checking tasks
Component Docking Unit
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
– Function Test of Used Tape Cutter
2X
– Greasing the Tape Cutter
5X
– Greasing the Cutting Blade
2X
– Greasing the COT Insert
1X
– Greasing the Locator Bearing on the Component Trol-
ley for SIPLACE SmartFeeder E
1X
Cleaning and Checking tasks
Optical systems
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
– Cleaning the IC and FC Cameras
4X
– Cleaning the PCB Barcode Scanner
*a
2X
*)a If availible
Cleaning and Checking tasks
Vacuum pump
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
– Checking/Replacing the Filter Insert
15 X
a