00197674-01-UM-E-Series-EN-12-2014.pdf - 第25页

User manual SIPLACE E 1 Introduction From software version SC 708.0 12/2014 Edition 1.3 Machine descr iption 25 1.3.5 Failure to use as prescribed Failure to use the prod uct as pre scribed can result in both dan ger to …

1 Introduction User manual SIPLACE E

1.3 Machine description From software version SC 708.0 12/2014 Edition

1.3.3 EC Declaration of conformity

The product/device described below

Manufactured by

ASM Assembly Systems Singapore Pte ltd

2 Corporation Road

#01-03 Corporation Place 1

conforms to the regulations and standards listed in the EU Declaration of Conformity provided.

1.3.4 Use as prescribed

The product may only be used for the areas of application specified in the catalogues and techni-

cal descriptions i.e. for the placement of SMD components and may only be used together with

the third party devices and components recommended or approved by ASM Assembly Systems

Singapore Pte ltd. Use for a different or extended purpose is not prescribed.

In the case of incorrect usage, ASM Assembly Systems Singapore Pte ltd will not assume liability

for any damage which occurs and will not guarantee the correct and proper function of machine

components.

Use as prescribed also includes compliance with all the instructions in the user manual.

For the product to operate correctly and reliably, it must have been transported, stored, erected

and assembled correctly and must be operated and maintained with care.

Product Type Item no.

SIPLACE E

Placement machine

Base machine 03105433-xx

User manual SIPLACE E 1 Introduction

From software version SC 708.0 12/2014 Edition 1.3 Machine description

1.3.5 Failure to use as prescribed

Failure to use the product as prescribed can result in both danger to life and limb and material

damage. For this reason, used other than as prescribed is expressly prohibited. In the case of in-

correct usage, ASM Assembly Systems Singapore Pte ltd will not assume liability for any damage

which occurs and will not guarantee the correct and proper function of machine components.

Use of the machine other than as prescribed includes, for example

– Operation of the placement machine with safety equipment deactivated or removed.

– Placement of components that do not meet the permitted specification.

– Use of component feeder modules that have not been approved.

– Use of unauthorized accessories and additional modules.

– Use of the placement machine by unqualified personnel.

– Operation of the placement machine without the hand guard (dummy feeder module) if not

every location is occupied with a feeder module.

– Unclear allocation of electrical connecting cables to each machine and the installed options.

– If there are two or more people standing at a changeover table location at the same time

during the retrofit.

– Persons standing on the cover plates and protective hoods.

1.3.6 Noise emissions

1.3.7 Environmentally-friendly disposal of materials and components

SIPLACE machines are preferably manufactured using materials and parts that can be easily sep-

arated and disposed of in an environmentally-friendly way.

Max. noise emissions 75 dB (A)

PLEASE NOTE

Proper, environmentally-friendly disposal

The owner of the system has sole responsibility for the proper environmentally-friendly

disposal of machines, working materials, consumables and wear parts.

 Please observe your national statutory provisions for waste disposal and environ-

mental protection.

1 Introduction User manual SIPLACE E

1.3 Machine description From software version SC 708.0 12/2014 Edition

1.3.8 Electromagnetic compatibility (EMC)

SIPLACE placement machines are designed and tested for professional use in industrial applica-

tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed

in any other environment.

1.3.9 Note on original SIPLACE accessories

PLEASE NOTE

Use of original spare parts and authorized accessories

The use of other parts will affect safety and will invalidate the liability for any consequen-

tial damage.

 Only use original spare parts and authorized accessories from ASM Assembly Sys-

tems Singapore Pte ltd.