00197674-01-UM-E-Series-EN-12-2014.pdf - 第31页
User manual SIPLACE E 1 Introduction From software version SC 708.0 12/2014 Edition 1.7 Important not es on the user manual 31 1.7 Important notes on the user manual 1.7.1 Contents and fili ng of the user manual This use…
1 Introduction User manual SIPLACE E
1.6 SIPLACE Station Programming From software version SC 708.0 12/2014 Edition
30
The SIPLACE Station Programming provides the user at the station with all means that are re-
quired for a complete description of the placement program.
1
Fig. 1.6 - 1 SIPLACE Station Programming main view
(1) SIPLACE Station Programming - Job editor
(2) SIPLACE Station Programming - Job control
(3) SIPLACE Station Programming - Teach job
It is possible to work on the description while the placement of another program is still in process.
To ensure an exact specification of the placement positions, fiducials and placement positions can
be taught by the placement machine.
In this process, the semi-transparent outline of the component is displayed above the camera pic-
ture taken by the PCB camera. The outline can then be aligned with the contact points on the PCB.
The specified positions can directly be used and saved in the placement program.
Once the PCB is completely described and taught, it can be optimized and produced at the station.
(1)
(2)
(3
User manual SIPLACE E 1 Introduction
From software version SC 708.0 12/2014 Edition 1.7 Important notes on the user manual
31
1.7 Important notes on the user manual
1.7.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users plus sys-
tem owner must therefore read it before commencing installation and commissioning.The instruc-
tions must be kept permanently accessible where the machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
1.7.2 Danger notes
1
1.7.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-
ture only and do not contain any contractual conditions or guaranties. The liability and obligations
assumed by ASM Assembly Systems Singapore Pte ltd can be found exclusively in the relevant
contract agreement concerning the supply of the machine described in this manual. This applies
in particular to all statements regarding performance or service life and the agreed liability for
faults or defects. The provisions of the contract regarding the liability for faults or defect are neither
extended nor restricted by any statements in this user manual.
WARNING
Read the user manual!
Only perform tasks on the machine if you have precise knowledge of the relevant sec-
tion in the user manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this user manual through carefully.
1 Introduction User manual SIPLACE E
1.7 Important notes on the user manual From software version SC 708.0 12/2014 Edition
32
1.7.4 Revision table
1
1.7.5 Further information about and contents of the documentation package
1.7.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems Singapore Pte ltd
2 Corporation Road
#01-03 Corporation Place 1
1.7.5.2 SIPLACE E on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log onto our SIPLACE E home page
at http://www.e-by-siplace.com.
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– Our products
– Services
– Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– Technical documentation
– Technical information
– Spare parts catalogs etc.
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.
Edition Amendments
12/2014 EN First Edition with SC.708.0