00197674-01-UM-E-Series-EN-12-2014.pdf - 第14页
1 Introduction User manual SIPLACE E 1.1 Single sided SIPLACE E From software version SC 708.0 12/201 4 Edition 14 1.1 Single sided SIPLAC E E 1.1.1 SIPLACE E with change over table on location 1 1 Fig. 1.1 - 1 Single si…
User manual SIPLACE E 1 Introduction
From software version SC 708.0 12/2014 Edition
13
1 Introduction
This user manual is a manual or reference work for operating and setting up the SIPLACE
®
E
placement machines. This document is the original user manual.
The header of each chapter contains the release and software version, to which this manual ap-
plies.
The E by SIPLACE mid-speed SMT placement platform was developed especially for small and
medium-sized electronics production environments.
The SIPLACE E placement machines are available in different variants and configurations:
– Single sided placement machine with fixed table or changeover table on location 1. There is
no component table for supplying components on location 2.
– Double sided placement machine with fixed table on location 1 and changeover table on lo-
cation 2.
– Double sided placement machine with changeover table on location 1 and location 2.
Five head options can be configured to perfectly meet the production needs:
–SIPLACE CP14
–SIPLACE CP12
– SIPLACE CP12/PP
– SIPLACE CP6/PP
–SIPLACE TH
1 Introduction User manual SIPLACE E
1.1 Single sided SIPLACE E From software version SC 708.0 12/2014 Edition
14
1.1 Single sided SIPLACE E
1.1.1 SIPLACE E with change over table on location 1
1
Fig. 1.1 - 1 Single sided SIPLACE E placement machine with change over table on location 1
(T) Direction of PCB transport
User manual SIPLACE E 1 Introduction
From software version SC 708.0 12/2014 Edition 1.1 Single sided SIPLACE E
15
The SIPLACE E placement machines demonstrate
– High precision
– Placement performance up to the high end process range
– A wide ranging component range from 01005 components to a size of 200 mm x 110 mm.
Following placement methods are possible for processing the components:
– Collect&Place and
– Pick&Place
The SIPLACE E placement machine consists one gantry. For an overview of the placement head
configuration, refer to section 3.1.1
from page 99.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
The SIPLACE E machine supports the SIPLACE single conveyor.
There is a changeover table available on location 1 for supplying components. On location 2 is no
table for supplying components.