00197674-01-UM-E-Series-EN-12-2014.pdf - 第148页
3 Technical data and assemblies User manual SIPLACE E 3.8 Feeder modules for SIPLACE E From software version SC 708.0 12/2014 Edition 148 3 Fig. 3.8 - 2 8 mm E tape feeder module - back view (1) Entry to the tape guide c…
User manual SIPLACE E 3 Technical data and assemblies
From software version SC 708.0 12/2014 Edition 3.8 Feeder modules for SIPLACE E
147
3.8.1.4 Design of the tape feeder modules
The two following diagrams show the design of the tape feeder module for the SIPLACE E.
3
Fig. 3.8 - 1 SIPLACE SmartFeeder E - front view
(1) Pogo-pin interface
(2) "Front" centering pin
(3) Lever for raising the pick-up window in order to thread in and remove the component tape
(4) Pickup window
(5) Tape guide channel outlet
(6) Cover foil rocker
(7) Cover foil packing wheels
(8) Locking latch
(9) Typeplate
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
3 Technical data and assemblies User manual SIPLACE E
3.8 Feeder modules for SIPLACE E From software version SC 708.0 12/2014 Edition
148
3
Fig. 3.8 - 2 8 mm E tape feeder module - back view
(1) Entry to the tape guide channel with tape spring
(2) Flap on cover foil container
(3) Removal handle, engaged
(4) Status display
(5) Operator panel
(6) Drive motors for the tape conveyor
(7) Front slider guide
(8) Back slider guide
(9) Drive motor for the cover foil packing device
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
User manual SIPLACE E 3 Technical data and assemblies
From software version SC 708.0 12/2014 Edition 3.8 Feeder modules for SIPLACE E
149
3.8.2 Technical data for the SIPLACE SmartFeeder E
In general, the tape feeder modules from the SIPLACE E are approx. 587 mm long and approx.
200 mm high. The technical data are listed in the following table.
3
The maximum height of the interference contours above the upper edge of the tape pocket is ≤ 3
mm. As the feeder modules do not show any flaps projecting upwards and are also fixed to the
changeover tables, the risk of a head crash is reduced to a minimum.
Tape feeder module Item no. L x H
[mm]
Width
[mm]
Location Transport
increment
[mm]
Max. tape
height
[mm]
SIPLACE SmartFeeder 2x8 mm E 00141569 587x200 22.9 2 1/2/4/8 3.5
SIPLACE SmartFeeder 8 mm E 00141570 587x200 10.8 1 1/2/4/8 3.5
SIPLACE SmartFeeder 12 mm E 00141571 587x200 22.6 2 4 - 16
a
16
SIPLACE SmartFeeder 16 mm E 00141572 587x200 22.6 2 4 - 20
a
16
SIPLACE SmartFeeder 24 mm E 00141573 587x200 34.4 3 4 - 32
a
25
SIPLACE SmartFeeder 32 mm E 00141574 587x200 46.2 4 4 - 40
a
25
SIPLACE SmartFeeder 44 mm E 00141575 587x200 58.0 5 4 - 52
a
25
SIPLACE SmartFeeder 56 mm E 00141576 587x200 69.8 6 4 - 64
a
25
Tape reels 178 to 432 mm in diameter (7“ - 17“)
Changeover time ≤ 8 s