00197674-01-UM-E-Series-EN-12-2014.pdf - 第67页
User manual SIPLACE E 2 Operational safety From software version SC 708.0 12/2014 Edition 2.3 Laser classif ication 67 2.3 Laser classification 2.3.1 Laser class 1 2.3.1.1 Classification of the whole machine 2 2 2.3.1.2 …
2 Operational safety User manual SIPLACE E
2.2 Warning labels From software version SC 708.0 12/2014 Edition
66
2.2.9 Warning label on the changeover table
2
Fig. 2.2 - 16 Warning labels on the changeover table
In fig. 2.2 - 16, page 66, hand crushing label, item no. 03118888-01 (1 label on the left side and 1
label on the right side)
Hand crushing
Hand crushing
2
RISK OF HAND CRUSHING!
Lifting and lowering the changeover table can crushing the hands.
Take care when lifting and lowering the changeover table.
Observe the description in Section 4.4 on page 191.
User manual SIPLACE E 2 Operational safety
From software version SC 708.0 12/2014 Edition 2.3 Laser classification
67
2.3 Laser classification
2.3.1 Laser class 1
2.3.1.1 Classification of the whole machine
2
2
2.3.1.2 Classification of the camera systems
2
2.3.2 Laser class 1M
Do not look directly at this with optical instruments!
2
2
All installed camera systems and the whole machine when ready
for operation are assigned to laser class 1.
The laser classes are determined according to DIN EN 60825-1.
PLEASE NOTE
Modules in laser classes 1 and 1M are not identified.
2
The following camera systems are assigned to laser class 1:
– Stationary cameras
– Stationary component camera, type 33 GigE
– Stationary component camera, type 25 GigE
– Stationary component camera, type 36 GigE
2
The following camera systems are assigned to laser class 1M:
– Component camera C&P, type 23 GigE on SIPLACE CP14
– Component camera C&P, type 30 GigE on SIPLACE CP12/6
2 Operational safety User manual SIPLACE E
2.4 Safety instructions for transporting the machine From software version SC 708.0 12/2014 Edition
68
2.3.3 Laser class 2
The following modules are assigned to laser class 2:
– Component sensor on SIPLACE CP14
(The entire machine is classified as laser class 2 if the coplanarity laser module option is installed.)
2
2.4 Safety instructions for transporting the machine
2
Use a fork-lift truck with the following specification to carry the machine:
Fork length: Min. 1800 mm
Carrying power: Min. 5,000 kg
Clear width between forks: Min. 350 mm 2
2
2
Laser radiation
Do not look into beam!
WARNING
Risk of tilting!
Risk of tilting, if the required specifications for the fork-lift truck are not observed.
Only use the specified fork-lift for transportation.
Proper transportation of the machine is described in chapter 4
, section 4.1, page 165.