00198051-01_IM_SetupCenter_8.0_EN.pdf - 第33页
Setup Center Application Installation 5.2.2 Setup Type – SIPLACE Setup Center GUI Individual Setup Typ es and Next Steps Installation Manual SIPLACE Setup Center 8.0 33 Step 2 ► The Start Copying Files dialog box gives y…
Setup Center Application Installation
Individual Setup Types and Next Steps 5.2.2 Setup Type – SIPLACE Setup Center GUI
32 Installation Manual SIPLACE Setup Center 8.0
5.2.2
5.2.2 Setup Type – SIPLACE Setup Center GUI
Setup Type – SIPLACE Setup Center GUI
This setup type will install the GUI application of SIPLACE Setup Center. It is used to setup up a client
system while the database is located on a remote system.
Step 1
► Run through the steps in chapter "General Settings".
► Select the SIPLACE Setup Center GUI setup type.
► Click Next.
Setup Center Application Installation
5.2.2 Setup Type – SIPLACE Setup Center GUI Individual Setup Types and Next Steps
Installation Manual SIPLACE Setup Center 8.0 33
Step 2
► The Start Copying Files dialog box gives you a chance to check the information again, which you
have entered during the previous steps.
► Click Next if you accept all the information entered so far.
► If you want to alter one or more details, click the Back button until you get back to the dialog box in
question.
► There, enter your changes and click Next to continue as usual.
⇨ The installation routine starts.
Setup Center Application Installation
Individual Setup Types and Next Steps 5.2.2 Setup Type – SIPLACE Setup Center GUI
34 Installation Manual SIPLACE Setup Center 8.0
Step 3 (Only when conflicts occur)
During the installation,settings are converted, some of which have been transferred from the local Appli
-
cationSettings.xml file to the database. This can lead to conflicts with existing settings. If conflicts were
detected, the Application Settings - Converter dialog appears.
► Decide whether the values in the database shall remaining (Keep database value), or should be re
-
placed by the local values (Overwrite database value with local value).
► All settings must be solved to get the next step.