00198051-01_IM_SetupCenter_8.0_EN.pdf - 第80页
Barcode-Scanner Installation Motorola Scanner 6.3.5 Motorola / Symbol Scanner Configuration 80 Installation Manual SIPLACE Setup Center 8.0 ► Select SIPLACE Scanner Config Tool to continue (select icon (1) for MC70 or ic…
Barcode-Scanner Installation
6.3.5 Motorola / Symbol Scanner Configuration Motorola Scanner
Installation Manual SIPLACE Setup Center 8.0 79
6.3.5.3
6.3.5.3 Establishing Connection
Establishing Connection
► Start Setup Center.
► Click on "Connect" to establish a connection to Setup Center.
In case the connection fails check the network settings again.
The software is now successfully configured.
6.3.5.4
6.3.5.4 SIPLACE Scanner Config Tool
SIPLACE Scanner Config Tool
Scanning problems with 1D barcodes
If the mobile scanner is unable to scan most of your 1D barcodes, use the following configuration utility,
to resolve the problems.
► Please exit all running applications on scanner and Symbol AppCenter to continue.
Starting MC67 / MC70 / MC 75
► Select Start->Programs to show present applications on scanner (select icon (1) for MC70 or Icon
(2) for MC67 / MC75).
⇨ The Start view appears.
Barcode-Scanner Installation
Motorola Scanner 6.3.5 Motorola / Symbol Scanner Configuration
80 Installation Manual SIPLACE Setup Center 8.0
► Select SIPLACE Scanner Config Tool to continue (select icon (1) for MC70 or icon (2) for MC67 /
MC75).
⇨ The SIPLACE Scanner Config Tool dialog appears.
Starting MC3090 / MC3190
► Select SIPLACE Scanner Config Tool icon (1) to continue.
⇨ The SIPLACE Scanner Config Tool dialog appears.
Barcode-Scanner Installation
6.3.5 Motorola / Symbol Scanner Configuration Motorola Scanner
Installation Manual SIPLACE Setup Center 8.0 81
SIPLACE Scanner Config Tool
You can change the following scan parameters here:
▪ Start scan operation:
– By pressing the scan button
– By releasing the scan button (recommended)
▪ Aiming Duration (ms):
Sets the time, how long a user is able to target a barcode with target laser.
▪ Focus Position:
– Far: You have to focus a barcode in scan range of about 23 cm (9 inches).
– Near: You have to focus a barcode in scan range of about 13 cm (5 inches).
▪ Allow poor printed 1D barcodes (slow rate scanning):
Use this setting, if most of your barcodes cannot be read in case of light damage.
► Press Ok or Apply to save the settings.
NOTICE
This setting is depending on barcode size. If you have problems to read your 1D barcodes with
small size, change the setting to “Near”.