00198051-01_IM_SetupCenter_8.0_EN.pdf - 第77页
Barcode-Scanner Installation 6.3.5 Motorola / Symbol Scanner Con figuration Motorola Scanner Installation Manual SIPLACE Setup Center 8.0 77 6.3.5 6 . 3 . 5 M o t o r o la / S y m b o l S c a n n e r C o n f ig u r a t i…
Barcode-Scanner Installation
Motorola Scanner 6.3.4 Setup Center Client Installation
76 Installation Manual SIPLACE Setup Center 8.0
► In case of a upgrade installation confirm the update of Setup Center Client with "OK".
► Select "OK" to close the window. The installation is now completed. Please restart the device by
holding down the power key 5 seconds. After restart the Setup Center Client starts automatically and
you can start with the configuration of Setup Center and Client Software.
Barcode-Scanner Installation
6.3.5 Motorola / Symbol Scanner Configuration Motorola Scanner
Installation Manual SIPLACE Setup Center 8.0 77
6.3.5
6.3.5 Motorola / Symbol Scanner Configuration
Motorola / Symbol Scanner Configuration
6.3.5.1
6.3.5.1 Configurate WLAN network
Configurate WLAN network
The communication between Setup Center and scanner is achieved by network connection (socket).
Setup Center takes the role of the server and the scanner that one of the client.
6.3.5.2
6.3.5.2 Configure Setup Center Client
Configure Setup Center Client
Starting MC67 / MC70 / MC75
After the installation routine has restarted the scanner the Setup Center Client is started automatically
and the Mobile Scanner dialog appears.
MC3090 / MC3190
For MC3090 / MC 31090 you must start the installation manually.
► Select SSC MobileScanner icon (1) to start installation.
⇨ The Mobile Scanner dialog appears.
Mobile Scanner dialog
NOTICE
Please configurate the barcode scanner for the operation within WLAN network - as described
in document Installation Manual WLAN Infrastructure for SIPLACE (item no. 00197199-xx).
Barcode-Scanner Installation
Motorola Scanner 6.3.5 Motorola / Symbol Scanner Configuration
78 Installation Manual SIPLACE Setup Center 8.0
► Open the configuration dialog via File->Configuration
► Type the IP-address/name of the PC where Setup Center is installed.
► Enter the port for which the scanner interface is configurated (default:7575).
► Here you can set a password to prevent modification on the scanner configuration.
For the first editing of the configuration the password is empty. In this case safety is deactivated. You
can set a password now. By confirmation with "OK" all settings were saved.
NOTICE
Volume of the buzzer
The volume of the buzzer is adjusted via the side (left) located controls on the device. The buzz
-
er gives accustical feedback in operation mode of Setup Center.