00193463-01.pdf - 第24页
1 Introduction, technical data User Manual SIPLACE S -25 HM 1.7 Electrical and pneumatic connection points Software Version SR.503.xx 04/2002 US Edition 24 1.7 Electrica l and pneumatic connec tion point s 1 Fig. 1.7 - 1…
User Manual SIPLACE S-25 HM 1 Introduction, technical data
Software Version SR.503.xx 04/2002 US Edition 1.6 The line concept
23
1.6 The line concept
1.6.1 Overview
The placement system can be linked to input and output stations, screen printing systems, sol-
dering ovens and other automatic placement systems from the SIPLACE range (HS-5x, S-20,
F4, F5, and the SIPLACE G glue application station). All SIPLACE modules are supplied with the
necessary data by the UNIX line computer. The placement system can also be linked to a higher
level data processing system through the use of suitable interfaces.
1.6.2 Technical data – line concept
1
*) SIPLACE HS-5x, SIPLACE S-23 HM, SIPLACE S-25 HM
with 12-segment Collect&Place head 1
**) SIPLACE 80 S-20, SIPLACE 80 F
4
with 12-segment Collect&Place head 1
***) SIPLACE S-25 HM
with 6-segment Collect&Place head
****) SIPLACE 80 F
4
/F
5
/F
5
HM 1
System SIPLACE placement lines
Modules SIPLACE HS-5x / SIPLACE 80 S-20 / SIPLACE S-23 HM
SIPLACE 80 F
4
/ SIPLACE F
5
/ SIPLACE F
5
HM,
SIPLACE S-25 HM
Peripherals Input/output stations
Screen printers
Soldering ovens
Inspection stations, etc.
Component range from 0201 */ 0402 ** to 32 mm x 32 mm *** or
from 0201 */ 0402 ** to 55 mm x 55 mm ****
PCB conveyor Automatic width adjustment
PCB format
(length x width)
50 mm x 50 mm to 508 mm x 460 mm
(2" x 2" to 20" to 18")
Placement rate Depends on how the modules are connected to one another
Space required 4 m² / SIPLACE S/F module
7.5 m² / SIPLACE HS-5x module
1 Introduction, technical data User Manual SIPLACE S-25 HM
1.7 Electrical and pneumatic connection points Software Version SR.503.xx 04/2002 US Edition
24
1.7 Electrical and pneumatic connection points
1
Fig. 1.7 - 1 Electrical and pneumatic connection points on the placement system
(1) Compressed air unit
(2) Connection for compressed air line
(3) Main power filter Z1
(4) Hole for power cable
(5) Service socket
(6) Compressed air supply connection for component changeover table
(7) Power supply connection for component changeover table
(8) Communications connection for component changeover table
(9) LAN connection in the control unit
(10) Main power switch
(11) Control cable connection for matrix tray changer
User Manual SIPLACE S-25 HM 1 Introduction, technical data
Software Version SR.503.xx 04/2002 US Edition 1.7 Electrical and pneumatic connection points
25
DANGER
The placement system is supplied with 3 x 400 V or 3 x 208 V (US version) ± 5%, 50/60 Hz main
power voltage. This means that some parts of the system carry potentially lethal voltages - even
when switched off at the main switch. Incorrect handling of the placement system can therefore
result in death or severe injury or considerable damage to equipment. 1
WARNING
NEVER detach compressed air lines while they are still pressurized. Risk of injury. 1