00193463-01.pdf - 第62页
2 Operational Safety User Manual S IPLACE S-25 H M 2.1 Safety instructions Software Version SR.503.xx 04/2002 US Edition 62 2.1.6 Additional warning signs for the NAFT A region The foll owing figu re shows the po sitions…
User Manual SIPLACE S-25 HM 2 Operational Safety
Software Version SR.503.xx 04/2002 US Edition 2.1 Safety instructions
61
Fig. 2.1 - 3 Warning signs on the basic machine - part 3
T Direction of PCB transport 2
Item 1 in figure 2.1 - 3 showing the warning signs on the control unit on the basic machine 2
Item 2 in figure 2.1 - 3 showing the warning signs on the control unit of the basic machine 2
ACHTUNG
ATTENTION
Handhabungsvorschriften
beachten
Elektrostatisch gefährdete
Bauelemente
Electrostatic sensitive devices
Observe precautions for
handling
WARNING! MAIN POWER VOLTAGE
Completely isolate the machine
before removing the protective cover.
Capacitor discharge time
tmin. = wait 0.3 minutes
2 Operational Safety User Manual SIPLACE S-25 HM
2.1 Safety instructions Software Version SR.503.xx 04/2002 US Edition
62
2.1.6 Additional warning signs for the NAFTA region
The following figure shows the positions of the warning labels on the machine. They are made
from soft PVC film, and are abrasion-proof, light-fast and resistant to water and weathering. 2
The graphical symbols on the warning label correspond to the symbols defined in DIN 4844 and
SEMI S1-90, © SEMI 1986, 1996. 2
WARNING 2
Æ Make sure that the warning labels are always clearly identifiable and easily readable.
Æ Replace any damaged or illegible warning or notice labels.
Æ Replace any labels that are missing.
Fig. 2.1 - 4 Warning signs on the basic machine - NAFTA region
User Manual SIPLACE S-25 HM 2 Operational Safety
Software Version SR.503.xx 04/2002 US Edition 2.1 Safety instructions
63
Item 1 in Fig. 2.1 - 4 showing the warning signs on the basic machine - NAFTA region 2
Item 2 in Fig. 2.1 - 4 showing the warning signs on the basic machine - NAFTA region 2
Item 3 in Fig. 2.1 - 4 showing the warning signs on the basic machine - NAFTA region (on the cover
over the terminal panels) 2
Warning
High voltage
can cause
severe
injury or death
Operating
machinery can
crush and
mutilate limbs
Cutting tools
can slice or
sever limbs
Service in this area must be performed by
authorized personell only
Switch off main electrical and pneumatic
switches, remove from main power
Warning !
Hazardous voltages present
even when
EMERGENCY STOP
is pressed