00193463-01.pdf - 第49页
User Manual SIPLACE S-25 HM 1 Introduction, technical data Software Vers ion SR.503.xx 04/2002 US Edition 1.15 Overview of t he modules - P CB conv eyor 49 1 Clearanc e on PC B under side 25 mm ( standard ), 40 m m (op t…
1 Introduction, technical data User Manual SIPLACE S-25 HM
1.15 Overview of the modules - PCB conveyor Software Version SR.503.xx 04/2002 US Edition
48
The conveyor belts are driven by DC motors. The lifting table near the center conveyor clamps the
PCBs in position. The width of the PCB conveyor can be adjusted either 1
– via the menu or
– using the line computer.
1
1.15.2 Technical data – single conveyor system
1
1
1
1
1.15.3 Technical data – dual conveyor system
1
PCB format
(length x width)
50 mm x 50 mm to 508 mm x 460 mm
(2" x 2" to 20" x 18")
Long-board option: length up to 610 mm (24")
PCB thickness 0.5mm to 4.5mm
Max. PCB warpage On top: 4.5mm - PCB thickness
On bottom: 0.5mm + PCB thickness
Clearance on PCB underside 25mm (standard), 40mm (option)
PCB transport height 830mm ± 15mm (standard)
900mm ± 15mm (option)
930mm ± 15mm (option)
950mm ± 15mm (SMEMA: optional)
Fixed conveyor edge Right (standard), left (optional)
Type of interface Siemens (standard),
SMEMA (option)
Component-free handling edge 3mm
PCB changeover time 2.5 s
Bad fiducial recognition possible
Automatic width adjustment possible
PCB format
(length x width)
50 mm x 50 mm to 508 mm x 216 mm
(2" x 2" to 20" x 8.5")
Long-board option: length up to 610 mm (24")
PCB thickness 0.5mm to 4.5mm
Max. PCB warpage On top: 4.5mm - PCB thickness
On bottom: 0.5mm + PCB thickness
User Manual SIPLACE S-25 HM 1 Introduction, technical data
Software Version SR.503.xx 04/2002 US Edition 1.15 Overview of the modules - PCB conveyor
49
1
Clearance on PCB underside 25mm (standard), 40mm (option)
PCB transport height 830mm ± 15mm (standard)
900mm ± 15mm (option)
930mm ± 15mm (option)
950mm ± 15mm (SMEMA optional)
Stationary conveyor side Right (standard), left (optional)
Type of interface Siemens (standard)
SMEMA (option)
Component-free handling edge 3mm
PCB changeover time 2.5 s
Type of transportation synchronous or asynchronous
Components on each conveyor synchronous: different, asynchronous: same
PCB width on each conveyor synchronous: different, asynchronous: same
Ink spot recognition synchronous: not possible, asynchronous: possible
Automatic width adjustment synchronous: not possible, asynchronous: possible
1 Introduction, technical data User Manual SIPLACE S-25 HM
1.15 Overview of the modules - PCB conveyor Software Version SR.503.xx 04/2002 US Edition
50