00193463-01.pdf - 第35页

User Manual SIPLACE S-25 HM 1 Introduction, technical data Software Version SR.503.xx 04/2002 US Edition 1.11 Overview of the modules - controls 35 1.1 1.3.1 Controls on the input and outpu t sides of the placement syste…

1 Introduction, technical data User Manual SIPLACE S-25 HM

1.11 Overview of the modules - controls Software Version SR.503.xx 04/2002 US Edition

A 15" color touch screen monitor with a resolution of 1024 x 768 pixels provides the screen dis-

play. Both the keyboard and the touch screen can be used to enter data, and the ultra-flat IBM-

compatible PC keyboard incorporates a trackball for controlling the mouse. 1

Indicator lamps 1

The sequence of colors is white - green - white. These lamps are used to signal operating statuses

and malfunctions of the placement system. 1

Component barcode reader 1

There is a compartment for the Datalogic DL 910 component barcode reader between the monitor

and keyboard. The barcode reader enables the components to be set up and topped up quickly

and reliably. 1

1.11.3 Ergonomic arrangement of the controls

Figure 1.11 - 1 on page 32 provides an overview of the position of the controls, which are subdi-

vided into the following groups: 1

Operating panel on the PCB input side with 1

– Start button

– Stop button

– Emergency stop mushroom-head push-button

– Main switch (on the left-hand side)

Operating panel on the PCB output side with 1

– Emergency stop mushroom-head push-button

– Start button

– Stop button

– Component counter

–Key switch

Console on the central cross-beam with 1

– Station computer

– Touchscreen

– Keyboard and

– Component barcode reader (option)

User Manual SIPLACE S-25 HM 1 Introduction, technical data

Software Version SR.503.xx 04/2002 US Edition 1.11 Overview of the modules - controls

1.11.3.1 Controls on the input and output sides of the placement system

The controls on the input and output sides of the placement system perform identical functions.1

Emergency stop mushroom-head push-button and Start and Stop buttons 1

There is an emergency stop mushroom-head push-button, a Start button and a Stop button on

both the input and output sides of the PCB conveyor. This arrangement was adopted for the emer-

gency stop mushroom-head push-buttons because it enables them to be reached quickly and

easily from any position. 1

In addition, it is important to have an unrestricted view of the placement heads and placement area

during maintenance, servicing and setting up work in order to be able to check all the operations

carried out inside the machine. This particularly important during testing phases or when starting

single functions, for example. 1

Key switch 1

The key switch is located on the operating panel on the PCB output belt. It is only needed for set-

ting up and servicing work so, for reasons of efficiency, it is positioned near the Start and Stop but-

tons. 1

Main switch 1

The main switch is part of the power supply unit, so it is positioned on the left-hand side of the

PCB input belt. It is located here because it is only needed for servicing and maintenance work

and is therefore not subject to frequent use. 1

1.11.3.2 Controls on the placement system console

Station computer, monitor and keyboard 1

The station computer, monitor and keyboard are all mounted on the console. They are arranged

so that any person who is at least 1.60 m tall can work comfortably and efficiently. 1

Component barcode reader 1

The two component tables for supplying components are arranged on the right and left of the

placement system. For this reason, the component barcode reader is also located in the central

console, since it enables the operators to work comfortably and efficiently during the component

set-up and filling checks. 1

1 Introduction, technical data User Manual SIPLACE S-25 HM

1.11 Overview of the modules - controls Software Version SR.503.xx 04/2002 US Edition

1.11.4 Technical data – component barcode reader

Fig. 1.11 - 2 Component barcode reader

(1) Component barcode reader

Connected to Station computer

Data entry Via barcode scanner or keyboard

Number of characters Up to 40

Not permissible Barcodes starting with a 1 or 2

and less than 5 characters long

Number of barcodes Up to 6 per component

Filter for suppressing data Up to 1 per barcode

Preset code types Code 39 (standard or ASCII)

Code 2 of 5, interleaved and normal,

Code 128, UPC/EAN/JAN codes

(others available upon request)