00193463-01.pdf - 第46页

1 Introduction, technical data User Manual SIPLACE S -25 HM 1.14 Overview of the modules - vision modules Software Version SR.503.xx 04/2002 US Edition 46 1.14.4 T echnical data - component vi sion module (st andard came…

User Manual SIPLACE S-25 HM 1 Introduction, technical data

Software Version SR.503.xx 04/2002 US Edition 1.14 Overview of the modules - vision modules

1.14.2 Technical data - component vision module (standard camera) on the

12-segment Collect&Place head

1.14.3 Component vision module (standard camera) on the

6-segment Collect&Place head

Fig. 1.14 - 2 Component vision module (standard camera) on the 6-segment Collect&Place head

Component dimensions 0.6 mm x 0.3 mm up to 18.7 mm x 18.7 mm

Range of components 0201 to PLCC44

including BGA, µBGA, flip-chip, TSOP, QFP

PLCC, SO to SO32, DRAM

Min. lead pitch 0.5 mm

Field of vision 24 mm x 24 mm

Illumination method Front-lighting

(3 levels programmable as required)

1 Introduction, technical data User Manual SIPLACE S-25 HM

1.14 Overview of the modules - vision modules Software Version SR.503.xx 04/2002 US Edition

1.14.4 Technical data - component vision module (standard camera) on the

6-segment Collect&Place head

1.14.5 PCB vision module

Fig. 1.14 - 3 PCB vision module

1.14.6 Technical data - PCB vision module

Component dimensions 0.5mm x 1.0mm to 32mm x 32mm

Component range

0603 to 32mm x 32mm

PLCC, SO, QFP, TSDP, SOT, MELF, CHIP, IC BGA

Minimum lead pitch 0.5 mm

Field of view 24mm x 24mm

Method of illumination Front lighting (3 levels programmable as required)

Fiducials Up to 3 per placement program

Local fiducials Up to 2 per PCB (may be of different types)

Library size Up to 255 fiducial types - system fiducials

≥ 249

Image processing Correlation principle or contour following method

(geometric alignment)

Illumination method Front-lighting

Recognition time per fiducial/ink spot 0.4 s

Field of vision 5.7 mm x 5.7 mm

User Manual SIPLACE S-25 HM 1 Introduction, technical data

Software Version SR.503.xx 04/2002 US Edition 1.15 Overview of the modules - PCB conveyor

1.15 Overview of the modules - PCB conveyor

1.15.1 Structure of the PCB conveyor

The placement system is supplied with a single conveyor as standard. A dual conveyor is avail-

able as an option. 1

The left or the right side of the PCB conveyor can be used as the stationary side, as required. 1

Fig. 1.15 - 1 PCB transport - single conveyor

(1) Input conveyor (2) Center conveyor

(3) Output conveyor (4) Lifting table

(5) Width adjustment T Direction of PCB transport 1