Cognex_Scanner_HS-60_HF_X-_D_S_F -05.pdf - 第31页
2 Assembly instructions Special design Cognex Scanner SIPL ACE HS-60 / HF-serie s / X-series / D-series / S / F 06/2008 Edition 33 2.4 Scope of delivery General: 2 – Datam an I/O Box from Cognex (001761 18-xx) – Adapter …
2 Assembly instructions Special design Cognex Scanner SIPLACE HS-60 / HF-series / X-series / D-series / S / F
06/2008 Edition
32
2.3 Restrictions
– The PCB barcode has to be placed on the first 15-22 cm of the PCB. The maximum scanning
range is arround 22 cm depending on the set scanning frequency.
– The barcode should have the same size.
– The exposure time has to be set up by the operator software of the scanner.
– The upper barcode has to be placed at least 3 mm from the side edge of the PCB.
– The lower barcode has to be placed at least 5 mm from the side edge of the PCB.
– Only the barcode on one side can be scanned at once.
– The common restrictions for PCB barcodes at SIPLACE machines still apply.
2 Assembly instructions Special design Cognex Scanner SIPLACE HS-60 / HF-series / X-series / D-series / S / F
06/2008 Edition
33
2.4 Scope of delivery
General: 2
– Dataman I/O Box from Cognex (00176118-xx)
– Adapter cable for Dataman 100 I/O Box
– Assembly instructions for Cognex Scanner (item no.: 00195610-xx)
– Soko CD with documentation, Dataman data sheet and Cognex software
2
For one scanner: 2
– 1 Cognex scanner Dataman 100
– 1 Interface cable for Dataman 100 (03062979-xx)
– 1 Holding bracket for scanner – upper side – premounted
or
1 holding bracket for scanner – lower side – premounted
– 2 Hexagon socket screws M3 x 5 mm
– 2 Washers ø 7,0 mm
2
For two scanners: 2
– 2 Cognex scanner Dataman 100
– 2 Interface cables for Dataman 100 (03062979-xx)
– 1 (2) Holding bracket(s) for scanner – upper side – premounted
and/or
1 (2) holding bracket for scanner – lower side – premounted
– 4 Hexagon socket screws M3 x 5mm
– 4 Washers ø 7,0 mm
2
2 Assembly instructions Special design Cognex Scanner SIPLACE HS-60 / HF-series / X-series / D-series / S / F
06/2008 Edition
34
For four scanners: 2
– 4 Cognex scanner Dataman 100
– 4 Interface cables for Dataman 100 (03062979-xx)
– 2 Holding bracket(s) for scanner – upper side – premounted
and
2 holding bracket for scanner – lower side – premounted
– 8 Hexagon socket screws M3 x 5 mm
– 8 Washers ø 7,0 mm
2
2.5 Necessary tools
– Set of hexagon socket spanners
– Set of screw drivers
– Cable ties
– Cable clips
–Side cutter
– Lintfree cloths
– Ethylalcohol for cleaning
2
2
2
Interface cable for Dataman 100