Cognex_Scanner_HS-60_HF_X-_D_S_F -05.pdf - 第41页
2 Assembly instructions Special design Cognex Scanner SIPL ACE HS-60 / HF-serie s / X-series / D-series / S / F 06/2008 Edition 43 2 o T ake the Dataman I/O-Box and connect the scanner to it. 2 Scanner connection Adapter…
2 Assembly instructions Special design Cognex Scanner SIPLACE HS-60 / HF-series / X-series / D-series / S / F
06/2008 Edition
42
2.8 Setup of the Cognex scanner
o Shut down the machine and switch it off at the main switch.
o Disconnect the interface cable from the relevant scanner.
2
If the adapter cable is connected directly to the interface cable, the scanner can be damaged. 2
2
2
2
Adapter cable for
Dataman I/O-box
Dataman I/O-Box
Connection to
barcode manifold
2 Assembly instructions Special design Cognex Scanner SIPLACE HS-60 / HF-series / X-series / D-series / S / F
06/2008 Edition
43
2
o Take the Dataman I/O-Box and connect the scanner to it.
2
Scanner
connection
Adapter cable
connection
USB
connection
Cable from scanner
Dataman I/O Box
2 Assembly instructions Special design Cognex Scanner SIPLACE HS-60 / HF-series / X-series / D-series / S / F
06/2008 Edition
44
o Connect the end of the adapter cable coming from the Dataman I/O-Box with the relevant con-
nection on the barcode manifold.
2
o Connect the USB cable to the Dataman I/O-Box.
2
2
2
If the scanner is operated by the I/O box and connected with the software, on the station computer
will appear an error message caused by a run time error of the RS232 interface. Please discon-
nect the scanner from your computer after completion of the settings. 2
2
o Switch on the machine.
o Connect the second end of the USB cable with a computer on which the program for the scan-
ner software is installed. The program “DataMan 3.x Software” can be installed from the CD or
downloaded at http://www.cognex.com. Please follow the instructions.
2
2
USB cable