00198218-01_IM_TX1320M2_en.pdf - 第39页

Installing Primergy T X1320 M2 - Win dows Server 2012 R2 05/2016 Edition 39 Figure 4-25: IP Configuration of the S IPLACE LAN adapter before re moving the default gateway ► Remove the default gat eway entry f rom the IP …

Installing Primergy TX1320 M2 - Windows Server 2012 R2 05/2016 Edition

NOTICE

Network Card identification

This procedure only works if you have disconnected all other network cables except the

SIPLACE connection, as mentioned in the first chapter.

Now, we need to remove the default gateway from the configuration of the SIPLACE LAN network

adapter.

Figure 4-23: Selecting Properties of the connected SIPLACE LAN adapter

► Right-click on the connected SIPLACE LAN network adapter (the other adapter has the state

“Network cable unplugged”)

► Select Properties.

Figure 4-24: Ethernet Properties

► Click the Internet Protocol Version 4 (TCP/IPv4) text (not the checkbox!) and select Properties.

Installing Primergy TX1320 M2 - Windows Server 2012 R2 05/2016 Edition

Figure 4-25: IP Configuration of the SIPLACE LAN adapter before removing the default gateway

► Remove the default gateway entry from the IP configuration, as shown in the following picture.

Figure 4-26: IP Configuration of the SIPLACE LAN adapter after removing the default gateway

► Click the OK to close the window and apply the setting.

Installing Primergy TX1320 M2 - Windows Server 2012 R2 05/2016 Edition

4.5 Further Preparation Steps

Before applying the Support Media, you must check a couple of settings.

These further preparation steps are described in the document "Required Steps before using

Support Media".