00198218-01_IM_TX1320M2_en.pdf - 第7页
Installing Primergy T X1320 M2 - Win dows Server 2012 R2 05/2016 Edition 7 2.3 BIOS Settin gs Some boot device s need to be removed from the boot order. ► Press the power butt on of the server. After a couple of second s…
Installing Primergy TX1320 M2 - Windows Server 2012 R2 05/2016 Edition
6
2 Preparation
Before installing the server, some preparation tasks have to be performed.
2.1 Interfaces Overview
The following picture shows an overview of the interfaces of your computer hardware (backside).
Figure 2-1: Back of TX150 S8 computer
2.2 Used Network Connections
► Before you begin, please ensure that you have connected the SIPLACE LAN network cable
(usually IP range 172.22.x.x) to the (onboard) network adapter and removed all other network
cable connections.
2
3
4
5
6
7
Legend:
1) Connector to graphics card (use
the delivered 2* DVI splitter cable)
2) Onboard VGA connector
3) SIPLACE LAN Network
connection
4) Additional onboard LAN
connection (not used)
5) USB 2.0 connectors
6) USB 3.0 connector (use this
connector for your USB 3.0
devices for enhanced
performance)
7) Power connector
Installing Primergy TX1320 M2 - Windows Server 2012 R2 05/2016 Edition
7
2.3 BIOS Settings
Some boot devices need to be removed from the boot order.
► Press the power button of the server.
After a couple of seconds, some boot information will be displayed.
► Immediately after the first text is displayed, press the “F2” key multiple times to enter the BIOS.
It may take about 45 seconds, until the BIOS screen is displayed.
Figure 2-2: Initial BIOS screen
► After the BIOS screen is displayed, press the → key (right arrow) multiple times to select the
Boot option.
Installing Primergy TX1320 M2 - Windows Server 2012 R2 05/2016 Edition
8
Figure 2-3: Boot screen
► On the Boot screen, press the ↓ key (down arrow) multiple times until the boot option IBA GE
Slot 0700 v1381 is highlighted.
► With the device highlighted, press the ENTER key.
Figure 2-4: Disabling the boot option for the first network adapter
► Press the ↓ (down arrow) key until Disabled is highlighted.
► Press the ENTER key to remove the drive from the boot order.