YSM40 Mainte_E.pdf - 第34页
8 4.1 Removing the pumps and making preparations 4- 9 0 4.2.1 Removing the head cover and cylinder 4-1 0 4.2.2 Removing the pressing plate a…
1
1
5.1.1 Cleaning the spline shaft 3-41
5.2 HS head 3-43
5.2.1 Cleaning and lubricating the ball cage and main shaft 3-43
5.2.2 Cleaning and lubricating the scissors gears 3-44
5.2.3 Cleaning and lubricating the clutch and hook 3-45
5.2.4 Cleaning the switching valve gasket 3-46
7
5.3.1 Cleaning the spline shaft 3-47
5.3.2 Cleaning and lubricating the scissors gear 3-48
5.4 Conveyor 3-49
5.4.1 Inspecting the conveyor belt and cleaning the guides 3-49
5.4.2 Cleaning and greasing the hexagon spline 3-51
5.5 W-axis 3-52
5.5.1 Cleaning and lubricating the W-axis ball screw 3-52
5.5.2 Cleaning and lubricating the W-axis guide 3-53
5.6 PU axis 3-54
5.6.1 Cleaning and lubricating the PU axis ball screw 3-54
5.7 Controller 3-55
5.7.1 Cleaning the filter 3-55
6
5.8.1 Cleaning the filter and cup 3-56
Chapter 4
Long-term inspection and other maintenance
1
1
2
2.1 Replacing the blow station filter 4-2
2.2 UPS battery 4-3
3.
4
5
3.1.1 AZ axis 4-5
3.1.2 Both sides of cATS 4-5
3.2 6-month inspection 4-6
3.2.1 AH axis 4-6
3.2.2 Magazine shaft 4-6
3.2.3 Pickup station (pallet clamp) 4-7
3.2.4 Pickup station (vertical guide) 4-7
8
4.1 Removing the pumps and making preparations 4-9
0
4.2.1 Removing the head cover and cylinder 4-10
4.2.2 Removing the pressing plate and cup packing 4-12
4.2.3 Removing the cylinder parts 4-12
4.3 Reinstalling the replacement parts 4-13
4.3.1 Reinstalling the cup packing and pressing plate 4-13
4.3.2 Reinstalling the cylinder parts 4-13
4.3.3 Reassembling the head cover 4-14
Chapter 5 Lubrication points and schedule
1. Lubrication preparations 5-1
1.1 Compatible grease 5-1
1.2 Grease gun 5-1
2.
2
2.1 X-axis 5-2
2.1.1 4-beam type 5-2
2.1.2 2-beam type 5-3
4
2.2.1 4-beam type 5-4
2.2.2 2-beam type 5-5
2.3 W-axis 5-6
2.4 PU-axis 5-7
2.5 Head unit 5-8
2.5.1 HS head 5-8
2.5.2 FL head 5-9
0
0
3.2 AH-axis 5-11
3.3 Pickup station and others 5-12
3
Appendix
1. Specifications A-1
1.1 Air regulator unit A-1
1.2 Power connection terminals A-2
1.3 Connection between machines A-3
1.3.1 PREVIOUS INTERFACE connector A-3
1.3.2 NEXT INTERFACE connector A-4
2. Warranty A-5
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii