Nordson_EFD_OptiSure_Operating_Manual.pdf - 第39页

OptiSure Automated Optical Inspection 39 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. # Click Step Reference Image 9 5. SHIFT + A B •…

100%1 / 76
OptiSure Automated Optical Inspection
38 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
# Click Step Reference Image
4
>
• Click a socket in the Mark Library to
save the mark, then click TEMPLATE
when the Template Match window
appears.
The system saves the image in the
Mark Library.
5
>
• Click the ARROW icon.
• In the Primary View screen, right-
click and select ADD NEW ARROW.
The system adds an arrow (called
Arrow A in this example) to the
screen.
6
1.
2.
3.
A
• Use the mouse to manipulate the
arrow so that it extends from the
outside of the rectangle to the
inside, as shown.
- To move the entire arrow, click
and drag the middle box (item 1).
- To elongate or shorten the arrow,
click and drag the arrow point
(item2) or the upper box (item 3).
7
4.
A
• Right-click the middle box (item4)
of the arrow and then select
PARAMETER.
The AOI Arrow window opens.
8 • Select the following for Arrow A:
- Type: INTERSECT LINE.
- Directon: DARK TO LIGHT.
- LINE1.
• Close the dialog box to save the
settings.
Continued on next page
Intersect Line Example (continued)
To Create an Intersect Line Mark Image (continued)
Using the Arrow Types (continued)
OptiSure Automated Optical Inspection
39www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
# Click Step Reference Image
9
5.
SHIFT +
A B
• Create Arrow B by copying Arrow A.
NOTE: To copy an arrow, press and
hold the SHIFT key, click and hold
the middle box (item5), and then
drag to duplicate the arrow. The
copied arrow will have the same
Parameter settings.
10 A B
6.
• Right-click the middle box (item6)
of the new Arrow B and then select
PARAMETER.
11 • Verify the following for Arrow B:
- Type: INTERSECT LINE.
- Directon: DARK TO LIGHT.
- LINE1.
• Close the dialog box.
12
• In the Primary View screen, right-
click and select ADD NEW ARROW
to create Arrow C on the vertical
edge of the workpiece.
13
C
• Right-click the middle box of the
new Arrow C and then select
PARAMETER.
Continued on next page
Using the Arrow Types (continued)
Intersect Line Example (continued)
To Create an Intersect Line Mark Image (continued)
OptiSure Automated Optical Inspection
40 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
# Click Step Reference Image
14
• Select the following for Arrow C:
- Type: INTERSECT LINE.
- Directon: DARK TO LIGHT.
- LINE2.
• Close the dialog box to save the
settings.
15
7.
SHIFT +
C
D
• Copy Arrow C and drag the copy
down to create Arrow D.
16
C
D
8.
• Right-click the middle box (item8)
of the new Arrow D and then select
PARAMETER.
17 • Verify the following for Arrow D:
- Type: INTERSECT LINE.
- Directon: DARK TO LIGHT.
- LINE2.
NOTE: Do not close this dialog
box. The next steps will make
adjustments to all the arrows.
18
9.
• Select the ALL checkbox (to cause
the system to enter the same
settings for all arrows).
• Change Direction to LIGHT TO
DARK.
• Adjust THRESHOLD until the
crosshairs (item 9) appear on the
camera screen.
Continued on next page
Using the Arrow Types (continued)
Intersect Line Example (continued)
To Create an Intersect Line Mark Image (continued)