Nordson_EFD_OptiSure_Operating_Manual.pdf - 第62页
OptiSure Automated Optical Inspection 62 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. PREREQUISITES The confocal laser (Laser C) is…
OptiSure Automated Optical Inspection
61www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Using the Laser to Measure and Record Profiles
(continued)
To Install CL-NavigatorN on the DispenseMotion
Controller
The CL-NavigatorN software for the KEYENCE CL-3000 Series
laser is provided on a CD, but can also be downloaded from the
KEYENCE Corporation website as described below.
1. Using an Internet-connected computer, go to KEYENCE.com/
CLsupport.
2. Create a KEYENCE account, or sign in if you already have an
account.
3. Download the latest version of CL-NavigatorN to a USB drive.
NOTE: If you cannot readily find the download link, contact
KEYENCE for technical support.
4. Insert the USB drive into an open USB port on the
DispenseMotion controller.
5. Navigate to the executable file on the USB drive and install the
software.
After the installation completes, the CL-NavigatorN shortcut
appears on the DispenseMotion controller desktop.
USB ports on the DispenseMotion controller
CL-NavigatorN software download link on the
KEYENCE website
To Obtain the All.cldt File
The All.cldt file is required for the laser measurement feature to
work correctly.
1. Contact your Nordson EFD representative to obtain the All.cldt
file.
2. Place the All.cldt file on a USB drive.
3. Insert the USB drive into an open USB port on the
DispenseMotion controller.
NOTE: You can leave All.cldt on the USB drive or copy it
anywhere onto the DispenseMotion controller. Just be sure to
remember where the file is located.
OptiSure Automated Optical Inspection
62 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
PREREQUISITES
The confocal laser (Laser C) is properly installed and set up using the Laser Setup wizard. Refer to “Setting Up
the Confocal Laser” on page10.
The CL-NavigatorN software has been installed on the DispenseMotion controller. Refer to “To Install CL-
NavigatorN on the DispenseMotion Controller” on page61.
The All.cldt file has been obtained from Nordson EFD and can be located for transfer to the DispenseMotion
conroller. Refer to “To Obtain the All.cldt File” on page61.
To Send “All.cldt” to the DispenseMotion Controller
# Click Step Reference Image
1
• On the DispenseMotion controller
desktop, open CL-NavigatorN.
2 • Click FILE(F) and select OPEN
SETTINGS FILE(O).
3 • Ensure that SEND SETTINGS TO
CONTROLLER is selected.
• Click OK.
4
>
• Navigate to the location where
“All.cldt” is stored.
• Select “All.cldt” and click OPEN.
5 • Click OK to clear the message.
• Continue to the next procedure to use
the “All.cldt” settings file to measure
and record the profile (displacement or
thickness) of a fluid or a workpiece in
real time.
Using the Laser to Measure and Record Profiles
(continued)
OptiSure Automated Optical Inspection
63www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Using the Laser to Measure and Record Profiles
(continued)
To Measure and Record the Profile of a Fluid or a Workpiece
PREREQUISITES
The “All.cldt” file has been sent from CL-NavigatorN to the DispenseMotion controller as described under “To
Send “All.cldt” to the DispenseMotion Controller” on page62.
# Click Step Reference Image
1
• On the DispenseMotion controller
desktop, open DispenseMotion.
2
LASER PROGRAM >
>
• Insert a LASER PROGRAM command
and specify the laser program you
want to use. For this example, enter
1.
NOTE: Selection 1 is the
Displacement laser program for non-
transparent materials or surfaces.
• Click OK.
3
LASER PROFILE >
>
• In the next empty command address,
insert a LASER PROFILE command.
• Enter 1 to turn Laser Profile ON.
• Click OK.
Continued on next page