00193872_Install_WinXP_manual.pdf - 第5页
Installation Manual for Windows XP (manual setup) Edition 04/2006 1 Introduction 1.1 Scope This document describes how to install the basic Windows XP operating sy stem and then Service Pack 2 on a SIPLACE Pro computer i…
Installation Manual for Windows XP (manual setup) Edition 04/2006
4 / 37
Installation Manual for Windows XP (manual setup) Edition 04/2006
1 Introduction
1.1 Scope
This document describes how to install the basic Windows XP operating system and then Service
Pack 2 on a SIPLACE Pro computer in a domain. The customer is responsible for the installation of
the Microsoft current service packs and the current hot fixes.
1.2 System requirements
There are recommended hardware configurations for SIPLACE Pro. Please see the current version
description of your application and version for details.
These requirements depend on software application, version and configuration you plan for.
For Service Pack 2 please take into account the information from Microsoft regarding hardware and
software compatibility.
Note:
The SIPLACE station computer must be installed with the “unattended setup”.
5 / 37
Installation Manual for Windows XP (manual setup) Edition 04/2006
2 Installation of the Windows XP Operating System
2.1 Installation of the Windows XP Base system
→ Insert the CD "Windows XP" into the CD-ROM.
The message "Press any key to reboot from CD" appears during the startup phase of the computer.
→ Press any key to boot from CD.
The following dialog appears:
Fig. 2-1: Windows XP Professional
→ Press Enter to continue.
The dialog "End-user License agreement" appears.
Fig. 2-2: Windows XP Licensing Agreement
6 / 37