754_____cmeng0000.pdf - 第47页
Documenting Process Calibrator Replaceable Parts 37 Replaceable Parts Table 18 lists the customer replaceable parts. Replacement parts can be ordered from Fluke Corporation and its authorized represen tatives by using th…
753/754
Calibration Manual
36
Calibration Data
The date of the last calibration and verification shows on the calibration sticker and on
the calibration screen in Setup mode. The CAL. STATUS number on the sticker should
always match the Calibration Status number in the calibration screen. Calibration of the
Product is to be done by qualified personnel.
In Case of Difficulty
XWWarning
To avoid possible electric shock or personal injury, do not use
the Product if it operates abnormally. Protection may be
impaired. When in doubt, have the Product serviced.
If the display is blank or unreadable, but the beeper works when the Product is turned on,
make sure the brightness is correctly adjusted. To adjust the Intensity, see “Display
Intensity” in the Users Manual.
If the Product will not turn on, make sure the battery is not dead or disconnected from the
battery charger. If the Product receives power, the power button should be lit. If the
button is lit, but the Product does not power up, have the Product serviced. See “How to
Contact Fluke”.
Service Center Calibration or Repair
Calibration, repairs, or servicing not included in this manual must be done only by
qualified service personnel. If the Product fails, examine the battery pack first, and
replace it if necessary.
Make sure that you operate the Product in accordance with the instructions in this
manual. If the Product is faulty, send a description of the failure with the Product.
Pressure modules do not need to accompany the Product unless the module is faulty also.
Be sure to pack the Product securely, using the original shipping container if it is
available. See “How to Contact Fluke” and the Warranty Statement.
Documenting Process Calibrator
Replaceable Parts
37
Replaceable Parts
Table 18 lists the customer replaceable parts. Replacement parts can be ordered from
Fluke Corporation and its authorized representatives by using the part number. In the
event that the part ordered has been replaced by a new or improved part, the replacement
will be accompanied by an explanatory note and installation instructions, if necessary.
See Figure 16.
Table 18. Replacement Parts
Reference
Designator
754 754-SI 753 753-SI
Description
Part
Number
Part
Number
Part
Number
Part
Number
BT1 3409439 3409439 3409439 3409439
75x Battery, LI-ION, 7.2V,
4.4AH
DS1 3367520 3367520 3367520 3367520
LCD Module, 4.3 In Diag,
480xrgbx272 Pixels, LED
Backlight
H1-H6 1558745 1558745 1558745 1558745
Screw, 5-14,.750, Pan, Black
Chromate, Blunt Pt, Thread
Form
H7-H16 3783203 3783203 3783203 3783203
Screw, M3x0.5, 6mm, Pan
Head, Phillips, S-L Nylon
Patch
H17-H28 642931 642931 642931 642931
Screw, 4-14, .312, Pan,
Phillips, Thread Form, #3
Head
H29-H30 3469899 3469899 3469899 3469899
Nut, Slotted, M9 X 0.5
Thread
H30-H32 3469900 3469900 3469900 3469900
Washer, Locking, 12.5mm
od
MP3 3369304 3369304 3369304 3369304
Fluke-75x, TC Isothermal
PCA
MP4 3404752 3404752 3404752 3404752 Fluke-75x, Case Top
MP5 3404765 3404765 3404765 3404765 Fluke-75x, Case Bottom
753/754
Calibration Manual
38
Table 18. Replacement Parts (cont.)
Reference
Designator
754 754-SI 753 753-SI
Description
Part
Number
Part
Number
Part
Number
Part
Number
MP6, MP7 3404776 3404776 3404776 3404776
Fluke-75x, Connector
Cover
MP8 3404790 3404790 3404790 3404790 Fluke-75x, Tilt Stand
MP9 3948631 3948631
Fluke-753, Connector
Bracket, Right
MP9 3404803 3404803
Fluke-754, Connector
Bracket, Right
MP10 3404815 3404815 3404815 3404815
Fluke-75x, Connector
Bracket, Left
MP11 3404826 3404826 3404826 3404826
Fluke-75x, Retainer,
Isothermal Stopper
MP12 3404832 3404832 3404832 3404832
Fluke-75x, Stopper,
Isothermal
MP13 3977652 Fluke-753, Mask
MP13 3981533 Fluke-753, Mask, SI
MP13 3439164 Fluke-754, Mask
MP13 3977665 Fluke-754, Mask, SI
MP14 3405856 3405856
Fluke-753, Decal, Case
Top
MP14 3405856 3405856
Fluke-754, Decal, Case
Top
MP15 3977713 3977713 Fluke-753, Keypad
MP15 3369430 3369430 Fluke-754, Keypad
MP17-MP19 884259 884259 884259 884259
Input Receptacle
Insulator (Black)
MP20-MP22 884254 884254 884254 884254
Input Receptacle
Insulator (Red)
MP23 3478081 3478081 3478081 3478081
Fluke-75x, Foam, Dust
Seal